Installation; Placing; Assembly Of Components - ESAB Mig C420 Instruction Manual

GB
5

INSTALLATION

The installation must be executed by a professional.
WARNING!
This product is intended for industrial use. In a domestic environment this product may cause radio
interference. It is the user's responsibility to take adequate precautions.
Lifting instructions
The power supply should be lifted by means of its lifting
eye. The handle is only intended for pulling it along the
ground.
5.1

Placing

Position the welding power source so that its cooling air inlets and outlets are not
obstructed.
5.2

Assembly of components

WARNING!
During transport, the rear wheels of the power source are in their forward position.
Before use, place the wheels in their rear position.
C420e
– 68 –