Table of Contents
Advertisement
Event history
To view event history in the system's memory, select «SYSTEM CONTROLS» menu, then shortly press
button.
Navigate several last events using
showing time of the event and flashing corresponding trigger zone indicators.
To exit menu without saving, press and hold
back
Automatic engine start
Shortly press
button to enter «REMOTE START SETTINGS» menu. Shortly press
between menu sublevels. Sub-level values are changed using
When the settings are changed, the values should be saved. To do this, press
«SEND» sublevel and press
button to save new changes. Changes will be sent to the base unit, it
will be confirmed with double sound signal of the remote.
To exit menu without saving, press and hold
!
i
,
f yOu havE NOT savEd NEw sETTiNgs
rEmOTE aNd auTOmaTic ENgiNE sTarT sETTiNgs will rEmaiN ThE samE as bEfOrE
24
(forward) and
(back) buttons. Events are displayed by
button for 1 second.
system
CHECK
controls
arming
12:43
30
12 0V
24°
27°
entering menu
disarming
12:44
forward
button to switch
and
buttons.
button to move to
button for 1 second.
PA N D O R A L I G H T V 3
remote start
settings
remote start
remote start
settings
settings
remote start
settings
start by time
enabled
start by time
start by time
enabled
enabled
start by time
enabled
• enable/disable daily automatic engine starts by time. Set the start time in «START TIME» menu
start by time
disabled
start by time
start by time
disabled
disabled
start by time
disabled
start time
start time
07:30
start time
07:30
start time
07:30
• setting automatic engine start time for daily starting
07:30
start by temp
enabled
start by temp
start by temp
enabled
enabled
start by temp
enabled
start by time
disabled
start by time
• enable/disable automatic engine start by engine temperature sensor. Set the starting temperature
start by time
in «START TEMP» menu
disabled
disabled
.
start by time
disabled
start temp
– 20°
start temp
U S E R A N D I N S TA L L AT I O N M A N UA L
start temp
– 20°
start temp
– 20°
settings
remote start
settings
start by time
enabled
start by time
entering menu
enabled
start by time
disabled
on
off
start by time
disabled
start time
07:30
start time
07:30
hours
minutes
start by temp
enabled
start by temp
enabled
start by time
disabled
start by time
disabled
on
off
start temp
– 20°
start temp
– 20°
work
duration
work
20 min
25
Advertisement
Table of Contents
