System Description - Cebora 476.50 Instruction Manual

CEBORA S.p.A.
2

SYSTEM DESCRIPTION.

The Cebora PLASMA WELDING ROBOT Welding System is a system for Tig welding with Plasma
Arc, developed for use in combination with a Welding Robot arm, on automated welding systems.
It comprises a Power Source, with integrated Control Panel, a Cooling Unit, a Wire Feeder Unit, a Plasma
Console and a Robot Interface (fig. 2).
GB
Power Source – Wire Feeder extension (art. 1168.00, l = 5m; art. 1168.20, l = 10m).
2
Power Source – Robot Interface signals cable connection (art. 1200, l = 5m).
3
Power Source – Robot Interface CANopen cable (1.5 m long, included in the Robot Interface).
4
5 Robot Control cabinet.
6 Welding wire 15 Kg spool holder (art. 121) (option Marathon Pack).
7 Plasma-Tig torch.
8 Wire Feeder Unit (WF4-R3, art. 1661).
10 Welding wire sheath (art. 1935.00, l = 1,6 m; art. 1935.01, for Marathon Pack).
21 Power Source (Tig AC-DC 2643/T, art. 351-60).
22 Cooling Unit (GRV10).
24 Control Panel (integrated in the Power Source).
25 Robot Interface (RAI 217, art. 217-01).
26 Custom multiwire wiring.
30 Plasma Welding Console (PW Console, art. 476.50).
31 Plasma Console – Robot Interface signals cable connection (art. 1167.00, l = 5m).
33 Cooling Unit – Power Source – Plasma Console extension (art. 1172.00) (the signals cable of this
extension in Robot applications as not to be connected).
34 Plasma gas supply hose.
35 Plasma gas cylinder.
This Instruction Manual refers to the Plasma Console PW Console art. 476.50, and has been prepared to
educate the personnel assigned to install, operate and maintain the welding machine.
It must be stored carefully in a place familiar to users, and consulted whenever there are doubts.
It must be kept for the entire operative life-span of the machine, and used to order spare parts.
3.300.188-B
fig. 2
10
04-03-2016