Contec F&eIT Series User Manual page 34

[When the development environment has been installed]
The following items are added to those registered [when the runtime environment has been
installed].
Pt Folder
Aio Folder
Cnt Folder
Dio Folder
API-CAP(W32) HELP
F&eIT Common Functions HELP : Help file for F&eIT common functions and Remote I/O
Setting Up a Device
(1) Determine what Group ID and Unit ID are to be used.
The Group ID on the front panel can be selected from a range of 0 to 8.
(Group ID A can also be selected on the CPU-CA20(FIT)GY.)
When using the I/O Assist Server Unit, assign the same group ID as the I/O Assist Server Unit
(Group ID 0 to 7).
(2) Connect the power cable and network cable to the I/O controller unit.
Setting the IP address for the I/O controller unit
Open the Start menu, choose "CONTEC API-CAP(W32)," then start the "F&eIT Setup Utility."
Specify the IP address and net mask in the setup dialog box.
For details on how to use the setup utility, consult the help file.
Finish setup
When you have finished setting up the I/O controller unit, restart it for the settings to take effect.
CPU-CA10(FIT)GY, CPU-CA20(FIT)GY
: This folder contains the entries of the program for diagnosing a
temperature measurement device and of the sample program for
accessing the temperature measurement device using an API.
: This folder contains the entries of the program for diagnosing
an analog device and of the sample program for accessing the
analog device using the API.
: This folder contains the entries of the program for diagnosing a
counter device and of the sample program for accessing the
counter device using an API.
: This folder contains the entries of the program for diagnosing a
digital device and of the sample program for accessing the
digital device using the API.
: Help file for API function library [API-CAP(W32)]
functions.
5. Setup
27