Table of Contents
Advertisement
Operating your Breville Pizzetta Oven
Before using the Pizzetta Oven for the
first time
1. Read all instructions included in this handbook.
2. Remove any packaging material or promotional
stickers before use.
3. Ensure the Pizzetta Oven is switched off and
unplugged at the power outlet.
4. Remove the Pizzetta Oven Crumb Tray and
Accessories and wash them in hot soapy water,
rinse and dry thoroughly.
5. Insert the power plug into the power outlet and
switch on.
6. To eliminate any residue it is recommended that
you pre-heat the oven for 15 minutes (with the
door open) before first use. Turn the Oven
temperature control dial to 220ºC and turn the
timer control dial to 15 minutes. Once the 15
minute cycle is complete, turn the oven off and
allow to cool.
7. Insert the accessories.
8. The Breville Pizzetta Oven is now ready to use.
Hints and tips
•
For easier cleaning, ensure the crumb tray is
in position.
•
Minimise cleanup by using the grill tray inserted
into the baking pan to catch spills when baking
or grilling.
•
Condensation may build up on the inside of the
glass door. This is normal and should evaporate.
8
All manuals and user guides at all-guides.com
'Baking' function
The 'Baking' function can be used to bake and roast
a wide variety of foods including pizzetta.
Both top and bottom elements will operate during
this function.
Using the 'Baking' function
1. Insert the power plug into a 230/240 volt power
outlet. Switch on at the power outlet.
2. Turn the 'Oven Temperature Control' to required
temperature between 0-20ºC.
3. Turn the timer control clockwise to the required
time or to the 'Stay On' setting.
4. When the cooking is complete a bell will sound
if a required time has been selected. If the
'Stay On' setting has been selected, the oven will
stay on until the 'Timer Control' has been turned
to 'Ready'.
5. Turn the 'Oven Temperature Control' to 'Off'.
6. To bake or roast more food, repeat the above
steps 1-3.
When using the 'Timer Control' within the 0-15
minute setting, more accurate timer control can
be achieved by first turning the timer past the 15
minute setting then back to the required setting.
After the 'Oven Temperature Control' has been
selected, the temperature can be changed at
any time during operation.
Turn the 'Oven Temperature Control' to 'Off'
and/or the 'Timer Control' to 'Ready' at any
time to stop the operation.
Note
Advertisement
Table of Contents
