F&F PCS-516 DUO Manual page 3

E
Generating pulse 0.5 s after the preset time t.
F
Generating a single pulse with time t by the rising edge of the
����� signal. During the time measurement, the system does not
react to ����� pulses.
G
Generating a single pulse with time t by the trailing edge of the
����� signal. During the time measurement, the system does not
react to ����� pulses.
H
Off delay with back-up feature The rising edge of the ����� si-
gnal causes the relay to be switched on, while the trailing edge
causes the start of time measurement. Applying the ����� signal
during the time measurement causes the cycle to be extended