Basic Settings - Miele HR 1622-3 i Operating Instructions Manual

Basic settings

You must make the following settings
before starting up for the first time. You
can change these settings again at a
later time (see "Settings").

Danger of injury caused by hot
surfaces.
The range gets hot during operation.
For safety reasons, only use the range
when it has been fully installed.
The range will turn on automatically
when it is connected to the power
supply.
Setting the language
 Select the desired language.
If you have accidentally selected a
language that you don't understand,
proceed as described in "Settings –
Language ".
Setting the location
 Select the required location.
Setting up Miele@home
Set up Miele@home?
display.
 To set up Miele@home immediately,
select Continue
 To set it up at a later date, select
See "Settings – Miele@home" for
information on setting up at a later
date.
 To set up Miele@home immediately,
select the connection method you
want to use.
You will then be guided by the display
and the Miele app.
will appear on the
.
Setting the date
 Set the day, then the month, and
finally the year.
 Confirm with OK.
Setting the time
 Set the time of day in hours and
minutes.
 Confirm with OK.
Setting the voltage

The set voltage variant must
match the voltage of the domestic
electrical supply in order to avoid the
risk of damage to the oven.
Confirm the voltage before setting. If
in any doubt, consult a qualified
electrician.
 Select the voltage variant.
 Confirm with OK.
Completing the commissioning
process
 Follow any further instructions on the
display.
The appliance is now ready for use.
Skip .
Before first use
41