Changing Factory Default Settings - Miele HR 1724-3 G DF Operating Instructions Manual

Changing factory default settings

Default settings are set in the oven
controls at the factory (see "Settings
overview").
A setting can be changed by altering its
status.
The settings can only be changed
when the mode selector is at Off.
 Select OK.
 If necessary, use  or  to move the
triangle  until it appears under .

  

 Confirm with OK.
  appears:

 If you want to change another setting,
select the appropriate number with 
or .
 Confirm with OK.

The setting is selected and the current
status appears, e.g.,  .
To change the status:
 Set the desired status using  or .
 Confirm with OK.
The status is saved and the setting
appears again.
 To change additional settings,
 If you do not want to change any


proceed in the same way.
further settings, select .
The settings will remain in the memory
in the event of a power failure.
Using the oven
43