Switching On The Burner; Switching Off A Burner - Miele HR 1421-3 E Operating Instructions Manual

Operating the electric cooktop

Do not heat empty pots on the
cooktop as this this can damage the
ceramic surface.
Never leave the cooktop unattended
when it is on!

Hot items placed down on the
display can damage the electronic
modules underneath.
Never place hot pots or pans in the
area of the display.
The burner control knobs have an
end stop.
Never turn the knobs clockwise to 0
beyond the  symbol or the last
digit.

Switching on the burner

 Press the burner control knob and
turn it clockwise to the desired power
level.
Activating the second heating circuit
Variable burners have a second heating
circuit that you can turn on.
There is a little bit of resistance when
turning the burner control knob from
12 to .
 Press the burner control knob in and
turn it clockwise past 12 to the end
stop, to .
The second heating circuit turns on.
 Then turn the burner control knob
counterclockwise to the desired
power level.
40

Switching off a burner

 Turn the burner control knob
counterclockwise to 0.
Residual heat indicator
When a particular temperature is
reached after the burner (e.g. front left
burner) has been switched on, the
corresponding residual heat indicator
lights up:
A little while after turning off the burner,
the residual heat indicator goes out.

Risk of burning due to hot
burners.
The burners will be hot after use.
Do not touch the burners while the
residual heat indicators are on.