Table of Contents
Advertisement
Problem
The accessories
make noises when
they are pushed into
or pulled out of the
oven.
The oven interior
lighting turns off after
a short time.
The oven interior
lighting does not turn
on.
Frequently Asked Questions
Possible cause and solution
The Self-Clean-resistant surface of the side runners
creates friction when accessories are pushed into or
pulled out of the oven.
To reduce the friction, add a few drops of heat-
resistant cooking oil to some kitchen paper and use
this to lubricate the side runners. Repeat this after
every Self Clean program.
The oven interior lighting is set to switch off
automatically after 15 seconds (default setting). You
can change this setting (see "Operating the oven –
Operating the clock / timer").
The halogen lamp is faulty.
Risk of injury due to hot surfaces
The oven gets hot during operation. You could burn
yourself on the heater elements, oven compartment,
or accessories.
Allow the heater elements, oven compartment, and
accessories to cool down before manual cleaning.
The lamp cover can get damaged if it falls down.
Hold onto the lamp cover while removing it so it does
not fall down. Place a cloth or similar item over the
oven floor and the open door to protect them.
Disconnect the oven from the power supply. Switch
off at the wall and withdraw the plug from the socket,
or switch off at the circuit breaker.
Use the tool supplied to remove the lamp cover from
the frame, pulling it out from behind.
Do not touch the halogen lamp with your bare fingers.
Please follow the manufacturer's instructions.
Pull the halogen lamp out.
Replace the halogen lamp (Osram 66725 AM/A,
230 V, 25 W, G9).
Engage the lamp cover at the front and push it back
into the holder.
Reconnect the oven to the domestic electrical supply.
79
Advertisement
Table of Contents
