Job Icons; Spool Area - Canon IR C2100 Job Management Manual

2
2-18 Introduction to the Command WorkStation
Jobs that are held are shown with a yellow icon in a yellow row, just beneath
the Spool or RIP status bar. Jobs that are held must be activated with a
command in order to print.
Active jobs are shown in white with white icons; new jobs are added above
older jobs.

Job icons

Two types of icons are used for both active jobs and jobs on hold.
Icon:
PostScript or raster data
headed for printing (top) or
after printing (bottom)
Printer icons

Spool area

The job icons in the Spool area are described below:
Spool area icon:
PostScript data from a user on the
1
network; no destination is defined
Yellow printer icon
Yellow job row
PostScript data headed for Print
2
White printer icon
White job row
PostScript data headed for Print
3
and Hold
Yellow printer icon
White job row
The Spool area is both the receiving area for jobs from users on the network/
parallel port (Hold queue) and the waiting area for jobs that will be RIPped
(jobs in the Spool queue).
Active jobs:
(white icons and rows)
What it indicates:
Jobs on Hold:
(yellow icons and rows)
PostScript data headed for Print and Hold
or job on Hold after printing (Hold)
How long you see the job:
Until a destination is chosen
Until the RIP is free