Job Properties - Canon IR C2100 Job Management Manual

2
2-30 Introduction to the Command WorkStation
Creating Filter templates
If you often filter jobs according to specific criteria, you can create a filter
template. In this way, you can filter jobs easily in one step and avoid the need
to enter specific information each time you want to filter jobs.
T
O CREATE A FILTER TEMPLATE
1. Open the Filter dialog box by choosing Filter from the Window menu.
2. Enter specific job filter criteria in the appropriate fields.
3. Click Save As.
4. Enter a name for the new template and click OK.
The new template is saved in the Templates pop-up menu in the Filter
dialog box.
To view jobs in the Queues, Archive, and Job Log windows according to a
filter template, open the Filter dialog box, choose the template by name from
the Templates pop-up menu, and click OK.
To delete an existing template, open the Filter dialog box, choose the
template by name from the Templates pop-up menu, and click Delete.
Click OK to confirm that you want to delete the template.

Job properties

When logged in as Operator or Administrator at the Command
WorkStation, you can use the Properties command to check and override the
print option settings (properties) of all jobs.
You can use this command to do the following:
• Check a user's job settings, especially notes and instructions
• Override a setting based on printed output or other print device conditions
: