Managing Server Fonts - Canon IR C2100 Job Management Manual

3
3-23 Downloading files and fonts
—In most cases, you do not need to use this
'showpage' (after EPS files)
option. Select the option only if an EPS file fails
'showpage' (after EPS files)
to print without it. This option adds a 'showpage' PostScript language
command at the end of the print job. Some applications omit this necessary
PostScript language command when they generate EPS files. Select this
option when printing EPS files generated by these applications. If you select
this option unnecessarily, extra blank pages may print.
If you experience problems downloading EPS files, you can print the file
directly from the application in which you created it.
(PDF files only)—Specify the page range you want to print.
Page Range
8. Click Download.
To cancel downloading, click Cancel or press the <Esc> key.

Managing server fonts

The iR C2100/2100S includes a number of built-in printer fonts. You can
download additional fonts to the iR C2100/2100S using the Manage Fonts
command (see page 3-24) or the Download command (see page 3-21). Users
on the network can also download fonts to the server using Fiery Downloader
(see the Printing Guide). Downloading fonts, either from the Command
WorkStation or with Fiery Downloader, requires that the Direct connection
is published in Setup (see the Configuration Guide).
The Manage Fonts command is available only if you logged in as
N :
OTE
Administrator.
Although no special privileges are necessary to download fonts,
Administrator privileges are required to remove fonts from the server. The
built-in printer fonts are locked and cannot be removed by anyone.
To print a list of fonts currently resident on the iR C2100/2100S, use the
Print Pages command (see page 3-5).