Step 4: Connecting The Power Cord; Step 5: Quick Setup; Playing Discs - Sony DVP-F25 Service Manual

All manuals and user guides at all-guides.com

Step 4: Connecting the Power Cord

Plug the player and TV mains leads (power cord) into a mains.

Step 5: Quick Setup

Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press >. To return to the previous adjustment, press ..
The on-screen display differs depending on the player model.
4
1
Turn on the TV.
5
2
Press [/1.
3
Switch the input selector on your
6
TV so that the signal from the
player appears on the TV screen.
"Press [ENTER] to run QUICK SETUP."
appears at the bottom of the screen. If this
message does not appear, select
"QUICK" under "SETUP" in the Control
Bar to run Quick Setup (page 63).
28
Enjoying the surround sound
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 23 to
25 ( through ). Each of these is the
B D
default setting and does not need to be adjusted
when you first connect the player. Refer to
page 62 for using the Setup Display.
Audio Connection (pages 22 to 25)
A
• No additional settings are needed.
B-1 C-1
• Set "DOWNMIX" to "DOLBY
SURROUND" (page 67).
• If the sound distorts even when the volume
is turned down, set "AUDIO ATT" to "ON"
(page 66).
B-2 C-2 D
• Set "DOWNMIX" to "DOLBY
SURROUND" (page 67).
• Set "DIGITAL OUT" to "ON" (page 67).
30
Press ENTER without inserting a
disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
The available languages differ depending
on the player model.
LANGUAGE SETUP
OSD: ENGLISH
DVD MENU:
ENGLISH
AUDIO:
FRANÇAIS
SUBTITLE:
DEUTSCH
ITALIANO
ESPAÑOL
NEDERLANDS
DANSK
SVENSKA
Press X/x to select a language.
The player uses the language selected
here to display the menu and subtitles as
well.
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
SCREEN SETUP
16:9
TV TYPE:
16:9
SCREEN SAVER:
BACKGROUND: 4:3 LETTER BOX
4:3 PAN SCAN
1-7
7
Press X/x to select the setting that
AUDIO SETUP
matches your TV type.
N If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 64)
N If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 64)
B-2
8 • D-PCM (page 67)
Press ENTER.
D
The Setup Display for selecting the type
• DOLBY DIGITAL (only if the
of jack used to connect your amplifier
amplifier (receiver) has a Dolby Digital
(receiver) appears.
decoder) (page 67)
11
Is this player connected to an amplifier
Press ENTER.
(receiver) ? Select the type of jack you
are using.
"DTS" is selected.
YES
AUDIO OUTPUT L/R
AUDIO SETUP
DIGITAL OUTPUT
NO
9
Press X/x to select the type of jack
(if any) you are using to connect to
an amplifier (receiver), then press
ENTER. 12
Press X/x to select whether or
Choose the item that matches the audio
not you wish to send a DTS signal
connection you selected on pages 22 to
to your amplifier (receiver).
25 ( through ).
D
A
Choose the item that matches the audio
A
• If you connect just a TV and nothing
connection you selected on pages 23 to
else, select "NO." Quick Setup is 25 (
finished and connections are complete.
B-2
B-1 C-1 • OFF (page 68)
• Select "AUDIO OUTPUT L/R." Quick
D
Setup is finished and connections are
• ON (only if the amplifier (receiver) has
complete.
a DTS decoder) (page 68)
B-2 C-2 D
13
• Select "DIGITAL OUTPUT." The Setup Press ENTER.
Display for "DOLBY DIGITAL" appears.
Quick Setup is finished. All connections
10
and setup operations are complete.
Press X/x to select the type of
If your AV amplifier (receiver) has an
Dolby Digital signal you wish to
MPEG audio decoder, adjust the
"MPEG" setting (page 68).
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 23 to
25 ( through ).
B D
4
Insert a disc in the player.

Playing Discs

Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied The labeled (or non-playback) side
appears through the disc window.
with your disc.
5
?/1 (power) button/ Press H.
indicator
The player starts playback (continuous
play). Adjust the volume on the TV or the
amplifier (receiver).
Depending on the disc, a menu may
appear on the TV screen. For DVDs, see
page 35. For VIDEO CDs, see page 36.
To turn off the player
Press [/1. The player enters standby mode.
z Hint
You can have the player turn off automatically
whenever you leave it in stop mode for more than
30 minutes. To turn on this function, set "AUTO
POWER OFF" in "CUSTOM SETUP" to "ON"
(page 65).
Notes on playing DTS sound tracks on a CD
• When playing DTS-encoded CDs,
excessive noise will be heard from the
analog stereo jacks. To avoid possible
1
damage to the audio system, the consumer
Turn on your TV.
should take proper precautions when the
analog stereo jacks of the player are
2
Press [/1.
connected to an amplification system. To
enjoy DTS Digital Surround™ playback, an
The player turns on and the power
external 5.1-channel decoder system must
indicator lights up in green.
be connected to the digital jack of the
3
player.
Switch the input selector on your
• Set the sound to "STEREO" using the
TV so that the signal from the
AUDIO button when you play DTS sound
tracks on a CD (page 48).
player appears on the TV screen.
• Do not play DTS sound tracks without first
N When using an amplifier (receiver)
connecting the player to an audio
Turn on the amplifier (receiver) and
component having a built-in DTS decoder.
select the appropriate channel so that you
The player outputs the DTS signal via the
can hear sound from the player.
DIGITAL OUT (OPTICAL) jack even if
"DTS" in "AUDIO SETUP" is set to "OFF"
in the Setup Display (page 68), and may
AUDIO ATT: OFF
AUDIO DRC: STANDARD
DOWNMIX: DOLBY SURROUND
DIGITAL OUT:
ON
DOLBY DIGITAL: D-PCM
D-PCM
MPEG:
DTS: DOLBY DIGITAL
C-2
AUDIO ATT: OFF
AUDIO DRC: STANDARD
DOWNMIX: DOLBY SURROUND
DIGITAL OUT: ON
DOLBY DIGITAL: D-PCM
MPEG: PCM
DTS: OFF
OFF
ON
through ).
B D
C-2
c continued
29
c continued
31