Step 5: Connecting The Power Cord; Step6: Quicksetup - Sony DVP-NS725P Operating Instructions Manual

Step 5: Connecting the Power Cord
Plug the player and TV power cords into an AC outlet.
24
Step6: QuickSetup
Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press lz,t_l. To return to the previous adjustment, press I_l.
)
q'/,l, --- "'"t _@'" "" ENTER
1
Turn on the TV.
2
Press I/(D.
Press PROGRESSIVE on the front panel
only if you have made video connection
(page 16) and wish to view
progressive video signals. The
PROGRESSIVE indicator lights up in
blue when the player outputs progressive
signals.
7
Switch the input selectoron your
TV so that the signal from the
player appears on the TV screen.
"Press [ENTERI to run QUICK SETUP"
appears at the bottom of the screen. If this
message does not appear, select
"QUICK" under "SETUP" in the Control
Menu to run Quick Setup (page 59).
8
4
Press ENTERwithout insertinga
disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
LANGUAGESETUP
5 Press÷/4, to select a language.
The player uses the language selected
here to display the menu and subtitles as
well.
6
PressENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
Press4,/4, toselectthe settingthat
matchesyour TV type.
• It you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 6(1)
• If you have a wide-screen IV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 60)
PressENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.