Step 3 Connecting The Power Cord; Step 4 Quick Setup - Sony DVP-NS300 Operating Instructions Manual

Step 3: Connecting the Power Cord
Plug the player and TV power cords into an AC outlet
Do not connect the power cord of your player to the "switched" power socket of an amplifier
(receiver) Otherwise, when you turn off the power of your amplifier (receiver), the settings for
the player may be lost
Step 4: Quick Setup
Follow the steps below to make the minimum number of basic adjustments to use the player
To skip an adjustment, press W To return to the previous adjustment, press l44
ENTER
I
ENTER
Turn on the TV.
Switch the input selector on the TV to the player.
Press POWER on the player and press &!.I on the remote.
"Press [ENTER] to run QUICK SETUP" appears at the bottom of the screen If this
message does not appear, select "QUICK' under SETUP in the Control Menu (page 13) to
run Quick Setup
Press ENTER without inserting a disc.
The Setup Display for selecting the language used in the on-screen display appears
24