Step 5: Connecting The Power Cord; Step 6: Quick Setup - Sony DVP-NS775V Service Manual

DVP-NS775V/NS780V
Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
C
Logic) decoder and 3 to 6 speakers
You can enjoy Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
(receiver) has a digital input jack, use
C-2
CD/DVD player
COAXIAL OPTICAL FRONT REAR CENTER R-AUDIO-L VIDEO
L
S VIDEO
R LINE OUT
PCM/DTS/
WOOFER
DOLBY DIGITAL
DIGITAL OUT 5.1CH OUTPUT
Optical digital cord
(not supplied)
C-2
Remove jack cap
before connecting
COAXIAL OPTICAL
or
PCM/DTS/
DOLBY DIGITAL
DIGITAL OUT
to DIGITAL OUT
(COAXIAL or OPTICAL)
Coaxial digital cord
(not supplied)
to coaxial or optical digital input
[Speakers]
Amplifier (receiver) with Dolby
Surround decoder
Rear (L) Rear (R)
Subwoofer Center
l: Signal flow
Notes
• When connecting 6 speakers, replace the
monaural rear speaker with a center speaker, 2
rear speakers and a subwoofer.
• Super Audio CD audio signals are not output from
the DIGITAL OUT jacks.
: Connecting to the 5.1 ch input jacks
D-1
You can enjoy 5.1 ch surround sound using
the internal Dolby Digital, DTS, or Super
Audio CD Multi decoder of this player.
: Connecting to a DIGITAL OUT jack
D-2
This connection will allow you to use the
Dolby Digital, or DTS decoder function of
your AV amplifier (receiver). You are not
able to enjoy the surround sound effects of
this player.
z Hints
• For connection D-2
For correct speaker location, refer to the operating
instructions of the connected components.
• To enhance the sound performance:
– Use high-performance speakers.
– Use front, rear, and center speakers of the same
size and performance.
– Place the subwoofer between the left and right
front speakers.
Notes
For connection D-2
• After you have completed the connection, be sure
to set "DOLBY DIGITAL" to "DOLBY
DIGITAL" and "DTS" to "DTS" in Quick Setup
(page 30).
• When you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency, set
"48kHz/96kHz PCM" in "AUDIO SETUP" to
"96kHz/24bit" (page 82).
• Super Audio CD audio signals are not output from
the DIGITAL OUT jack.
C-1 . If your amplifier
.
Y P B P R
OUT COMPONENT VIDEO OUT
C-1
(red)
R-AUDIO-L VIDEO
or
LINE OUT
(white)
to LINE OUT L/R (AUDIO)
Stereo audio cord
(not supplied)
(white) (red)
to audio input
[Speakers]
Front (L) Front (R)
Rear (mono)
,
Connecting to an AV amplifier (receiver) with 5.1 ch input jacks and/or a
D
digital input jack and 4 to 6 speakers
If your AV amplifier (receiver) has 5.1 channel inputs, use
If you want to use the Dolby Digital, or DTS decoder function on your AV amplifier (receiver),
connect to its digital jack using
realistic audio presence in the comfort of your own home.
CD/DVD player
COAXIAL OPTICAL
PCM/DTS/
DOLBY DIGITAL
DIGITAL OUT
D-2
COAXIAL OPTICAL
PCM/DTS/
DOLBY DIGITAL
DIGITAL OUT
Coaxial digital cord
(not supplied)
to coaxial or optical
digital input
[Speakers]
Center Subwoofer
l: Signal flow
27 28

Step 5: Connecting the Power Cord

Plug the player and TV power cords into an AC outlet.

Step 6: Quick Setup

Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press >. To return to the previous adjustment, press ..
1
Turn on the TV.
2
Press [/1.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
"Press [ENTER] to run QUICK SETUP"
(press enter to run Quick Setup) appears
at the bottom of the screen. If this
message does not appear, select
"QUICK" (quick) under "SETUP"
(setup) in the Control Menu to run Quick
Setup (page 77).
4
Press ENTER without inserting a
disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
29 30
1-6
.
D-1
. With the following connections, you can enjoy a more
D-2
FRONT REAR CENTER R-AUDIO-L VIDEO Y P P
B R
L
S VIDEO
R LINE OUT OUT COMPONENT VIDEO OUT
WOOFER
5.1CH OUTPUT
to DIGITAL OUT
(COAXIAL or OPTICAL)
to 5.1CH
FRONT
OUTPUT
L
Optical digital cord
(not supplied)
R
Remove jack cap
before connecting
5.1CH OUTPUT
Stereo audio cord
(not supplied)
or or
Monaural audio cord
(not supplied)
to audio input
[Speakers]
AV amplifier (receiver) having
5.1ch inputs or/and a decoder
Front (L)
Rear (L)
"/1
./>
X/x ENTER
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
5
Press X/x to select a language.
The player displays the menu and
subtitles in the selected language.
D-1
REAR CENTER
WOOFER
Front (R)
Rear (R)
ENGLISH
ENGLISH
FRENCH
SPANISH
PORTUGUESE