Searching For A Particular Point On A Disc; (Scan, Slow-Motion Play); Resuming Playback From The Point Where You Stopped The Disc (Multi-Disc Resume); Using The Dvd's Menu - Sony DVP-F25 Service Manual

affect your ears or cause your speakers to be
Additional operations
damaged.
Notes on playing DVDs with a DTS sound
track
• DTS audio signals are output only through
the DIGITAL OUT (OPTICAL) jack.
• When you play a DVD with DTS sound
tracks, set "DTS" to "ON" in "AUDIO
SETUP" (page 68).
• If you connect the player to audio
equipment without a DTS decoder, do not
set "DTS" to "ON" in "AUDIO SETUP"
(page 68). A loud noise may come out from
the speakers, affecting your ears or causing
the speakers to be damaged.
Notes
• When you insert an 8-cm (3-inch) disc, insert the
disc slowly at the centre of the disc slot. If you
cannot eject the disc, consult your nearest Sony
dealer.
• No adapter is required in order to play 8-cm (3-
inch) discs on this player. If an adapter is used,
damage to the player may result; therefore, never
use an adapter when playing 8-cm (3-inch) discs.
To
Stop
Pause
Resume play after
pause
Go to the next chapter,
track, or scene in
continuous play mode
Go back to the
previous chapter,
track, or scene in
continuous play mode
Stop play and remove
the disc
Replay the previous
scene (DVD only)
z Hint
The Replay function is useful when you want to
review a scene or dialog that you missed.
Note
You may not be able to use the Replay function with
some scenes.
32
× ×
The " 2B"/" 2b" playback speed is about
Resuming Playback from
twice the normal speed. The "2M"/"2m"
playback speed is faster than "1M"/
the Point Where You
"1m."
Stopped the Disc
Watching frame by frame (Slow-
motion play) Resume)
m or M
Press when the player is
The player stores the point where you stopped
in pause mode. To return to the normal speed,
the disc for up to 6 discs and resumes
press H.
playback the next time you insert the same
m or M
Each time you press
disc. When you store a resume playback point
during Slow-motion play, the playback speed
for the 7th disc, the resume playback point for
changes. Two speeds are available. With each
the first disc is deleted.
press the indication changes as follows:
Playback direction
y 1
2
Opposite direction (DVD only)
y 1
2
The "2 y"/"2
" playback speed is slower
than "1 y"/"1
."
1
2
z Hints
• To play from the beginning of the disc, press x
twice, then press H.
• For CDs and DATA CDs, the player remembers
the resume playback point for the current disc
unless the disc is ejected, the power cord plug is
disconnected, or only for DATA CDs, the player
enters standby mode.
34
All manuals and user guides at all-guides.com
Operation
Press x
Press X
Press X or N or H
Press >
Press .
Press A or Z
Press REPLAY
(Multi-disc
While playing a disc, press x to
stop playback.
"Disc resumes from this point." appears
on the TV screen.
Press H.
The player starts playback from the point
where you stopped the disc in Step 1.
1-8
Locking the disc slot (Child Lock)
Searching for a
You can lock the disc slot to prevent children
Particular Point on a
from ejecting a disc.
Disc
You can quickly locate a particular point on a
disc by monitoring the picture or playing back
slowly.
When the player is in standby mode, press
O RETURN, ENTER, and then [/1 on the
remote.
"Locked" appears on the TV screen when you
press the A/Z button on the player or the
Note
remote.
Depending on the DVD/VIDEO CD, you may not
The A/Z button on the player and the remote
be able to do some of the operations described.
do not work while the Child Lock is set.
Locating a point quickly by
playing a disc in fast forward or
To unlock the disc slot
When the player is in standby mode, press fast reverse (Scan)
O RETURN, ENTER, and then [/1 again.
Note
Press
disc. When you find the point you want, press
Even if you select "RESET" under "SETUP" in the
H to return to normal speed. Each time you
Control Bar (page 62), the disc slot remains locked.
press
playback speed changes. Three speeds are
available. With each press the indication
changes as follows:
Playback direction
× 2B (DVD/CD only) t 1M t 2M
Opposite direction
× 2b (DVD only) t 1m t 2m
Notes

Using the DVD's Menu

• "MULTI-DISC RESUME" in "CUSTOM
SETUP" must be set to "ON" (default) for this
function to work (page 66).
• The resume playback point for the current disc is
A DVD is divided into long sections of a
cleared when:
picture or a music feature called "titles."
– you change the play mode.
– you change the settings on the Setup Display. When you play a DVD which contains
• This function may not work with some discs.
several titles, you can select the title you want
• Resume Play does not work during Shuffle Play
using the TOP MENU button.
and Programme Play.
When you play DVDs that allow you to select
items such as the language for the subtitles
and the language for the sound, select these
items using the MENU button.
Number
buttons
1
Press TOP MENU or MENU.
The disc's menu appears on the TV
screen.
The contents of the menu vary from disc
to disc.
2
Press C/X/x/c or the number
buttons to select the item you want
to play or change.
3
Press ENTER.

(Scan, Slow-motion Play)

m or M
while playing a
m or M
during scan, the
c continued
33
35