Step 4: Connecting The Audio Cords; Step 5: Connecting The Power Cord; Step 6: Quick Setup - Sony DVP-NC60P Service Manual

Using the PROGRESSIVE button
By using the PROGRESSIVE button on the front panel, you can select the signal format in
which the player outputs video signals (Progressive or Interlace), and the conversion method for
progressive signals. The PROGRESSIVE indicator lights up when the player outputs
progressive signals.
Each time you press PROGRESSIVE, the display changes as follows:
PROGRESSIVE AUTO
m
PROGRESSIVE VIDEO
m
NORMAL (INTERLACE)
◆PROGRESSIVE AUTO
Select this setting when:
– your TV accepts progressive signals, and,
– the TV is connected to the COMPONENT VIDEO OUT jacks.
Normally select this under the above condition. This automatically detects the software type, and
selects the appropriate conversion method.
Note that the picture will not be clear or no picture will appear if you select these settings when
either of the above conditions is not met.
◆PROGRESSIVE VIDEO
Select this setting when:
– your TV accepts progressive signals, and,
– the TV is connected to the COMPONENT VIDEO OUT jacks, and,
– you want to fix the conversion method to PROGRESSIVE VIDEO for video based software.
Select this if the image is not clear when you select PROGRESSIVE AUTO.
Note that the picture will not be clear or no picture will appear if you select these settings when
either of the above conditions is not met.
◆NORMAL (INTERLACE)
Select this setting when:
– your TV does not accept progressive signals, or,
– your TV is connected to jacks other than the COMPONENT VIDEO OUT jacks (LINE OUT
(VIDEO) or S VIDEO OUT).
About DVD software types and the conversion method
DVD software can be divided into two types: film-based software and video-based software.
Video-based software is derived from TV, such as dramas and sit-coms, and displays images at
30 frames/60 fields per second. Film-based software is derived from film and displays images at
24 frames per second. Some DVD software contains both video and film.
In order for these images to appear natural on your screen when output in progressive format,
the progressive signals need to be converted to match the type of DVD software that you are
watching.
Notes
• When you play video-based software in progressive signal format, sections of some types of images may
appear unnatural due to the conversion process when output through the COMPONENT VIDEO OUT
jacks. Images from the S VIDEO OUT and LINE OUT (VIDEO) jacks are unaffected as they are output in
the normal (interlace) format.
• When using LINE OUT (VIDEO) or S VIDEO OUT, the picture may appear to flicker each time the
PROGRESSIVE button on the front panel is pressed (Interlace switches to Progressive or vice versa).
A B
Connecting to audio L/R input
jacks input jack
This connection will use your TV's or stereo If your AV amplifier (receiver) has a Dolby*
amplifier's (receiver's) two speakers for Digital or DTS*
sound. Connect using the audio/video cord jack, use this connection.
(supplied). Connect using a coaxial or optical digital cord
(not supplied).
Yellow
Yellow
White (L)
White (L)
Red (R) Red (R)
• Surround effect
• Surround effect (page 44)
Dolby Digital (5.1ch), DTS (5.1ch)
TV: Dynamic Theater, Dynamic, Wide,
Night
*1
Stereo amplifier (receiver): Standard, Night
*2
• After you have completed the connection, make
• The surround sound effects of this player cannot
• In order to listen to DTS sound tracks, you must
,continued
19
Connecting to a digital audio
1
2
decoder and a digital input
Coaxial cord
Optical cord
Manufactured under license from Dolby
Laboratories.
"Dolby," "Pro Logic," and the double-D symbol
are trademarks of Dolby Laboratories.
"DTS" and "DTS Digital Out" are trademarks of
Digital Theater Systems, Inc.
Notes
the appropriate settings in Quick Setup (page 22).
Otherwise, no sound or a loud noise will come
from your speakers.
be used with this connection.
use this connection. DTS sound tracks are not
output through the LINE OUT L/R (AUDIO)
jacks, even if you set "DTS" to "ON" in Quick
Setup (page 22).
,continued
21

Step 4: Connecting the Audio Cords

Select one of the following patterns A or B, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver).
This will enable you to listen to sound.
(red)
(white)
(yellow)*
LINE OUT
R-AUDIO-L VIDEO
to LINE OUT L/R (AUDIO)
DIGITAL OUT LINE OUT
COAXIAL R-AUDIO-L VIDEO
OPTICAL Y P B P R
COMPONENT VIDEO OUT S VIDEO OUT
to DIGITAL OUT
(COAXIAL or OPTICAL)
DIGITAL OUT
COAXIAL
OPTICAL
Optical digital cord (not supplied)
to optical
[Speakers]
digital input
Rear (L)
Front (L)
Center
: Signal flow
* The yellow plug is used for video signals (page 17).
z Hint
For correct speaker location, see the operating instructions supplied with the connected components.
20

Step 5: Connecting the Power Cord

Plug the player and TV power cords into an AC outlet.

Step 6: Quick Setup

Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press >. To return to the previous adjustment, press ..
1
Turn on the TV.
2
Press [/1.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
"Press [ENTER] to run QUICK SETUP"
(press enter to run Quick Setup) appears
at the bottom of the screen. If this
message does not appear, select
"QUICK" (quick) under "SETUP"
(setup) in the Control Menu to run Quick
Setup (page 62).
4
Press ENTER without inserting a
disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
22
1-5
DVP-NC60P
A
INPUT
(yellow)*
Audio/video
VIDEO
cord (supplied)
(white)
L
AUDIO
(red)
R
TV, projector, or AV
amplifier (receiver)
CD/DVD player
or
Coaxial digital cord
(not supplied)
B
to coaxial
[Speakers]
digital input
Rear (R)
Front (R)
AV amplifier (receiver)
with a decoder
Subwoofer
ENTER
LANGUAGE SETUP
OSD: ENGLISH
ENGLISH
MENU:
FRENCH
AUDIO:
SPANISH
SUBTITLE:
PORTUGUESE
5
Press X/x to select a language.
The player displays the menu and
subtitles in the selected language.
6
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
SCREEN SETUP
TV TYPE: 4:3 LETTER BOX
SCREEN SAVER: 4:3 LETTER BOX
4:3 PAN SCAN
BACKGROUND:
16:9
BLACK LEVEL:
BLACK LEVEL : OFF
(COMPONENT OUT)
4:3 OUTPUT: FULL