Guide To On-Screen Displays (Control Bar); Simple Start Guide; Quick Overview; Step 1: Unpacking - Sony DVP-F25 Service Manual

All manuals and user guides at all-guides.com
NDisplay 2
The following play modes 7~qs can be set.
Guide to On-Screen
The indicator lights up in blue when activated.
Displays
(Control Bar) Example: When "TVS" is set.
The following explains the Control Bar. The
Control Bar is used for making adjustments to
the settings or displaying information during
playback.
The displayed contents differ according to the
type of disc being played. The numbers in
G TVS (49)
parentheses indicate reference pages.
H "BNR" (52)
Displaying the Control Bar during
I "CUSTOM PICTURE MODE" (53)
playback J "DIGITAL VIDEO ENHANCER"
The following displays appear when the
K "ANGLE" (51)
DISPLAY button is pressed repeatedly
during playback. You can select the setting
that suits the current playback item and view
the related information.
L Appears when the player outputs the
NDisplay 1
The following play modes 1~4 can be set.
The indicator lights up in blue when activated.
Example: When Repeat Play is selected. (The
NDisplay 3
display will differ when A-B Repeat Play is
The following playback information is
set.)
displayed.
Example: When playing a DVD.
CHAPTER
A Repeat Play (42)
B Shuffle Play (41)
M TIME/TEXT icon (46)
C Programme Play (39)
N Disc type
D A-B Repeat Play (43)
O Title number of the DVD (46)
E Unit being repeated in this example.
P Chapter number of the DVD (46)
F Playback status (NPlayback,
Q Playing time or remaining time (46)
XPause, xStop, etc.)
m
NDisplay 4
R Format of the current audio signal (49)
12
Step 2: Inserting

Simple Start Guide

Batteries into the

Quick Overview

Remote
A quick overview presented in this guide will
You can control the player using the supplied
give you enough information to start using the
remote. Insert two R6 (size AA) batteries by
matching the 3 and # ends on the batteries
player for your enjoyment. To use the
surround sound features of this player, refer
to the markings inside the compartment.
to "Hookups" on page 17.
When using the remote, point it at the remote
sensor
Notes
• You cannot connect this player to a TV that does
not have a video input or SCART (EURO AV)
jack.
• Be sure to disconnect the power of each
component before connecting.

Step 1: Unpacking

Check that you have the following items: Notes
• Audio/video cord (pinplug × 3 y pinplug
• Do not leave the remote in an extremely hot or
× 3) (1)
humid place.
• Remote commander (remote) (1)
• Do not drop any foreign object into the remote
• R6 (size AA) batteries (2)
casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light
• Stand (1)
from the sun or a lighting apparatus. Doing so
• Screw (1)
may cause a malfunction.
• An EURO AV adaptor is included with
• If you do not use the remote for an extended
some models.
period of time, remove the batteries to avoid
possible damage from battery leakage and
corrosion.
14
NTSC
(54)
The indicator lights up in blue when
various angles are recorded on the
scene.
signal in NTSC format.
m
T41 – 8
DVD T 1:01:57
m
(DVD playback only)
DOLBY DIGITAL 3 / 2 .1
qk
on the player.
1-3
m
NDisplay 3
Shows the same information as Display 2
NNo display
during playback.
m
NReturn to Display 1
Displaying the Control Bar in
stop mode
NDisplay 4
The following displays appear when the
Shows the same information as Display 3
DISPLAY button is repeatedly pressed
during playback.
during stop mode. You can make basic
adjustments and customize the player to suit
your viewing preferences.
NDisplay 1
The following settings can be made.
NNo display
QUICK
NReturn to Display 1
A
SETUP (62)
• Select QUICK to make the minimum
number of basic adjustments for using the
player.
• Select CUSTOM to make a full range of
adjustments.
SETUP
• Select RESET to return the
adjustments to the default settings.
B
PARENTAL CONTROL (56)
• Set this to limit the playback of selected
discs on this player.
m
NDisplay 2
Shows the same information as Display 1
during playback.
CHAPTER
m

Step 3: TV Hookups

Remove the jack cover from the player (see fig. A and page 10).
Connect the supplied audio/video cord and the power cord in the order (1~3) shown below.
Be sure to connect the power cord last.
After connecting the cords, attach the jack cover (page 26).
CD/DVD Player
(red)(white)(yellow)
(red)
(yellow)
to AUDIO
to VIDEO OUT
OUT L/R
(white)
to video input
(yellow)
(yellow)
(white)
(white)
1
(red)
Audio/video
(red)
cord (supplied)
to audio input
l : Signal flow
When connecting to a standard 4:3 screen
connect the AUDIO OUT L/R jacks to the
TV TV's audio input jack.
Depending on the TV type, the image of some
For Asian models only
discs may not fit your TV screen.
To change the colour system
If you want to change the aspect ratio, please
The colour system of the player is set to
refer to page 64.
NTSC or PAL. If the on-screen menu of the
If your TV has a SCART (EURO AV) jack
player does not appear on the TV, change the
colour system of the player to the same colour
Attach the supplied EURO AV adaptor to the
system (PAL or NTSC) of your TV. To
TV, and connect to the player using the
change the colour system, hold ?/1 down for
supplied audio/video cord.
a few seconds while pressing X on the player.
When connecting to a monaural TV
Use a stereo-mono conversion cord (not
supplied). Connect the VIDEO OUT jack on
the player to the TV's video input jack, and
NTSC
m
T41 – 8
DVD T 1:01:57
m
m
13
3
Power source
TV
2
Power source
15