Raider RD-GBV05 User Manual page 21

Loosen the air cleaner cover retaining screw, and remove the cover and filter element.
Inspect the element. If the element is distorted or damaged, replace it with a new one.
Wash the element in clean fuel, and squeeze or blow dry. Wash the air cleaner cover in clean fuel, and
wipe or blow dry.
Install the element and cover, and then tighten the cover retaining screw.
EVERY 10/15 HOURS
Allow the engine to cool before servicing the spark plug!
Cylinder tightening or loosening the spark plug while the engine is hot!
Incorrect spark plug installation can result in serious engine damage.
EVERY 50 HOURS
(More frequently if you note reduced performance)
Spark Plug(turn counterclockwise to remove)
Use the spark plug wrench to remove the spark plug
(turn counter-clockwise to remove).
Clean and adjust the spark plug gap to 0.6-0.7mm.
Replace with a champion RCJ6Y or equivalent.Install
the spark plug finger-tight in the cylinder head, and then
tighten it firmly with the spark plug wrench. If a torque
wrench is available, torque the spark plug to 148-165
inch pounds.
! Never allow dirt or debris to enter the cylinder bore!
Before removing the spark plug , thoroughly clean the
spark plug and cylinder head area!
21