Table of Contents
Advertisement
EXP1240 System Installation Guide
Table 22:
Parameter
Firmware update server
address
Firmware path
Parameter
Handset Type
Required Version
Firmware file versions are independent for each handset type. Be sure you
enter the correct version number for the specific type of handset.
If the required version field for any handset type contains any value other
, clicking Save will start the firmware update process for that handset
than
0
type.
Parameter
Required Version
Update this base station only
© 2013 Uniden America Corp.
All manuals and user guides at all-guides.com
Firmware Update Settings
Description
Enter the IP address or URL of the server that hosts the
firmware update files. This server must be available before
starting an update.
Enter the path of the firmware update folder (see Table 7 on
page 42).
Table 23:
Update Handsets
Description
If you have more than one hardware version or handset
model on your system, each detected handset type will be
displayed here.
Enter the version of the firmware that will be used to update
each type of handset. This field must match the last 3 digits of
the name of the firmware file.
Table 24:
Update Base stations
Description
Enter the version of the firmware that will be used to
update the base station. This field must match the last 3
digits of the name of the firmware file.
Update the firmware on the currently connected base
station.
PROPRIETARY AND CONFIDENTIAL
parameters
parameters
parameters
Revision 06
Page 60 of 71
Advertisement
Table of Contents
