Table of Contents
Advertisement
EXP1240 System Installation Guide
Parameter
Enable RPORT
Keep alive time
Parameter
Local SIP port
SIP ToS/QoS
RTP port
RTP port range
RTP ToS/QoS
© 2013 Uniden America Corp.
All manuals and user guides at all-guides.com
Table 18:
NAT Settings
Description
Select
if you want the system to use RPORT in SIP messages.
Enabled
This will also cause the base stations to send Keep Alive messages
according to the Keep Alive time. Otherwise, leave this feature
.
Disabled
Enter the number of seconds (as a positive integer) between each keep-
alive message sent to maintain NAT address assignments. The default
value is 90.
Table 19:
SIP/RTP Settings
Description
Enter the port number the server should use for the first user agent
(UA) instance. Successive ports will be automatically assigned for
additional UA instances. The default port number is 5060.
Enter the Type of Service or Quality of Service priority code for SIP call
control traffic. The default value is 0x68 (104 in decimal notation).
Enter the number of the first RTP port to use. Successive ports will be
automatically assigned up to the number entered below. The default
port is 50004.
Enter the number of ports that can be used for RTP audio streaming
(the default is 40).
Enter the Type of Service or Quality of Service priority code for RTP
traffic; the default is 0xB8.
PROPRIETARY AND CONFIDENTIAL
parameters
parameters
Revision 06
Page 56 of 71
Advertisement
Table of Contents
