If you have any trouble with your phone, call our Customer Hotline at 1- 800-297-1023, Mon- Fri 7 am to 7 pm, Sat/Sun 9 am to 5 pm, CST. (Phone support is closed on holidays.) For more information on Uniden products and accessories, be sure to visit our web site: www.uniden.com ®...
• Standby Mode - The handset may be sitting in or off the base, but is NOT in use. The talk key has not been pressed and there is no dial tone. Uniden provides a customer service hotline for accessibility questions. If you have a disability and need customer service assistance or if you have any questions about how Uniden's...
If the connection is secure, the jack will stay in place. Then place the battery case cover back on the handset by sliding it upwards until it clicks into place. NOTE: For optimum performance, use only the Uniden Battery (BT-905 or BT-1006) supplied with your phone.
Page 5
Most phone systems use tone dialing. However, some phone systems (such as in rural areas) still use pulse dialing. Your Uniden phone supports both tone and pulse dialing. The default setting is tone dialing. If your phone system uses pulse dialing, follow the steps below to change the dialing mode: 1) In standby mode, press and hold the flash key until you hear a confirmation tone.
Making and Receiving Calls Making a call 1) Remove the handset from the base. 2) Press the talk key. The talk/batt low LED flashes and turns on. 3) Listen for the dial tone. 4) Dial the number. Receiving a call If the handset is in the base, simply remove the handset from the base.
Find Handset To locate the handset, press the find hs key on the base. The handset beeps for 60 seconds. The handset stops beeping when any key is pressed, when it is returned to the base, or when the find hs key is pressed. The handset also stops beeping when an incoming call is received. Low Battery Alert When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power.
3) If you need the phone to pause during the dialing sequence, press the redial/p key to insert a two-second delay between the numbers. You can enter multiple pauses to increase the delay. Each pause counts as a digit. 4) Press the memory key again. 5) To store this number as one of the ten speed dial numbers, enter a digit from 0 to 9.
If your cordless telephone is not performing to your expectations, please try these simple steps first. If these steps do not solve your problem, please call our Customer Hotline at 1- 800-297-1023. (Mon - Fri 7 am to 7 pm, Sat/Sun 9 am to 5 pm, CST. Phone support is closed on holidays.) NOTE: Do not attempt to service this unit yourself.
To minimize damage from these types of surges, a surge arrestor is recommended. Changes or modifications to this product not expressly approved by Uniden, or operation of this product in any way other than as detailed by the owner's manual, could void your authority to operate this product.
WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below.
Page 12
Having Trouble or Need a Part? Our customer care specialists are here to help you! Visit our website at www. uniden.com or call our Customer Hotline at 1-800-297-1023, Mon-Fri, 7 a.m. to 7 p.m. or Sat/Sun, 9 a.m. to 5 p.m. CST. (Phone support is closed on holidays.)