Bs (Base) Settings; Terminate Hs; Flash Time - Uniden UWG200 Owner's Manual

BS (Base) Settings

Terminate hS

This function allows you to delete a handset registration from the base.
1. Press the key.
MENU/R
2. Press or
3. Press the
MENU/R
you to enter the PIN code (The default PIN code is 0000). Then press the
key.
4. Use or
existent handset, a warning tone will be heard.
5. Press the key and the selected handset will not be registered.
MENU/R

Flash Time

You can select to change the Flash time by the following steps:
1. Press the
MENU/R
2. Press or
3. Use or
4. The display shows the current setting. Use the
then press
MENU/R
key repeatedly to choose BS Settings menu, then press
key, to choose the Terminate HS. The display shows "PIN?" to prompt
key to select a handset. If you select the current handset or a non-
key.
key to choose BS Settings menu, then press the
key to choose the Flash Time menu. Then press
key.
key.
MENU/R
key.
MENU/R
key to select Short/Long
or
key.
MENU/R
MENU/R
37