To get the most from your phone, please read this owner’s manual thoroughly. Also be sure to complete the product registration form and mail it in. Be sure to visit our web site at: www.uniden.com.
Other Printed Material Precautions and Important Safety Instructions If any of these items are missing or damaged, contact your place of purchase. Handset Handset Long Telephone Cord Long Telephone Cord Charging Cradle and Power Supply Rechargeable Battery Rechargeable Battery EXP93 Only:...
Controls and Functions 1. talk - used to answer calls 2. keypad - touchpad keys tone - special access key for some phone systems 4. mem - used to enter or recall numbers in memory 5. flash - used to access call waiting (if available) 6.
2. Wrap the AC adapter cord inside the molded strain-relief. 3. Plug one end of the long telephone cord into the TEL LINE jack on the base. 4. Raise the antenna on the base. 5. Plug the other end of the telephone cord into the telephone wall jack.
After the unit is mounted, raise the antenna. 7. Plug the other end of the telephone line into the telephone wall jack. 8. Plug the AC Adapter into a standard 120V AC wall outlet that is not controlled by a wall switch.
Extending the Antenna Before using your phone, be sure to raise its antenna to the vertical position. Installing the Battery Pack The memory backup feature allows up to 3 minutes after disconnecting the old battery pack to install a new one without losing any NOTE phone numbers stored in memory.
The extra charging cradle is not a replacement for the base. The extra charging cradle is not a replacement for the base. Put it in a different room than the base so you can recharge Put it in a different room than the base so you can recharge the phone on the cradle.
Making and Receiving Calls Handset on base When the phone rings, remove the handset from the base. Answer call (AutoTalk) 1. Remove the handset from the base and press 2. The talk LED lights. Make call 3. Listen for the dial tone. 4.
Erasing a Stored Number 1. Remove the handset from the base. 2. Press twice. 3. Press the memory location number (0-9) you want to clear. You will hear a long beep confirming that you have erased the number. Selecting a Different Channel If you have more than one cordless phone in your house, they must be set to different channels.
If your EXP90 Series cordless telephone is not performing to your expectations, please try these simple steps. If you are still unable to resolve the problems, contact your place of purchase. Caution: Do not attempt to service this unit yourself. All service must be done by qualified service personnel.