Table of Contents
Advertisement
EXP1240 System Installation Guide
Step
General System Settings
1. Change the name that appears at the top
of the configuration screens, specify a
configuration server, and enable SIP and
system logs.
2. Change the default user name and
password.
3. Change the PSTN tones and emergency
dialing format.
4. Configure basic network settings.
5. Specify time server address and DST
settings.
SIP Server Settings
6. Program the SIP server(s).
7. Program extensions on each SIP server.
8. Register a handset to each extension.
Using the Base Station Interface
Each base station has a built-in HTTP server that controls the configuration interface. To
open the web page:
1) Open a web browser window and type the IP address of the base station in the address
bar. If you don't know the base station's IP address, try one of the following:
∘ Use the IP Search function on the handsets. On any handset, press Menu (
MAC and IP addresses of all base stations within range. Find the MAC
address of the base station in the list to determine its IP address. To exit IP
Search, press End (
© 2013 Uniden America Corp.
All manuals and user guides at all-guides.com
Table 4: Summary: Basic system configuration
), then enter
*47* (*IP*)
) twice.
PROPRIETARY AND CONFIDENTIAL
Screens used Notes
Management Required
Web Security Recommended
Required for countries other
Country
than the US and Canada
Network
Required
Required (If you are updating
Time
Server information, you must
Settings
reboot the base station for
changes to take effect.)
Required (You must reboot the
Network
base station for changes to
Servers
take effect).
Extensions
Required
Extensions
Required
. After several seconds, the handset displays the
Revision 06
Page 16 of 71
Advertisement
Table of Contents
