Login Into The Ip-Kvm Switch And Logout; Login Into The Ip-Kvm Switch - Avocent KVM over IP switch User Manual

be flashed during the refresh process.
When the OSD value back to default setting, the bank seven segment LED on the front panel
will stop flashing
5.3 Login into the PS/2 IP-KVM switch and logout
5.3.1 Login into the PS/2 IP-KVM switch
Launch your web browser. Direct it to the address of your PS/2 IP-KVM switch, which you
configured during the installation process. The address used might be a plain IP address or a
host and domain name, in the case where you have given your PS/2 IP-KVM switch a
symbolic name in the DNS. For instance, type the following in the address line of your
browser when establishing an unsecured connection:
When using a secure connection, type in:
This will lead you to the PS/2 IP-KVM switch login page as shown in Figure 5-3.
The PS/2 IP-KVM switch has a built-in super user that has all permissions to administrate
your PS/2 IP-KVM switch:
The user "super" is not allowed to login via the serial interface of the PS/2 IP-KVM
switch.
http://<IP address of PS/2 IP-KVM>
https://<IP address of PS/2 IP-KVM>
Login name
Password
Table 5-1. Standard user settings
Figure 5-3. Login screen
super (factory default)
pass (factory default)
Warning
26
8/16 PS/2 KVM over IP switch