Security - Avocent Single port KVM over IP switch User Manual

Single port kvm over ip switch user's manual
Table of Contents

Advertisement

You have registered this username during your manual registration with the Dynamic
DNS Server. Spaces are not allowed in the Nickname.
Password
You have used this password during your manual registration with the Dynamic DNS
Server.
Check time
The IP-KVM switch card registers itself in the Dynamic DNS server at this time.
Check interval
This is the interval for reporting again to the Dynamic DNS server by the IP-KVM switch.
The IP-KVM switch has its own independent real time clock. Make sure the time
setting of the IP-KVM switch is correct. (see the Section called Date And Time )
6.5.3

Security

Force HTTPS
If this option is enabled access to the web front-end is only possible using an HTTPS
connection. The IP-KVM switch will not listen on the HTTP port for incoming connections.
In case you want to create your own SSL certificate that is used to identify the IP-KVM
switch refer to the Section called Certificate.
KVM encryption
This option controls the encryption of the RFB protocol. RFB is used by the Remote
Console to transmit both the screen data to the administrator machine and keyboard and
mouse data back to the host. If set to `Off' no encryption will be used. If set to `Try' the
Warning
Figure 6-22. Device Security
55
Single port KVM over IP switch

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Single port KVM over IP switch and is the answer not in the manual?

Questions and answers

Table of Contents