Canon H12157 User Manual page 334

Automatic redialing
When the receiving fax machine is busy or does not answer, or when an
error occurs while sending, the LASER CLASS 2060P waits a specified
time and then automatically redials the number. If the receiving fax is still
busy or does not answer, the LASER CLASS 2060P waits the specified
time and dials again. If the fax still does not go through, the LASER
CLASS 2060P prints an error TX report.
B
Bi-directional parallel interface port
An interface connection that can send and receive signals. For example,
when you print a document from your computer, data goes from your
computer to the LASER CLASS 2060P.
bps
Bits per second. Refers to the speed with which a fax machine sends and
receives data.
Broadcasting
Transmitting documents to more than one location (through the LASER
CLASS 2060P's memory).
C
Centronics
An interface standard for parallel data transmission. The interface on the
LASER CLASS 2060P is a Centronics-type parallel interface.
CNG
Calling Tone. This is a signal sent by fax machines to identify the call as
an incoming document. When the receiving fax detects this signal, it
automatically starts to receive the fax transmission. The majority of fax
machines in use today can send and detect CNG signals.
Coded Speed Dialing
An automatic dialing method that allows you to dial a fax or telephone
number by pressing the Coded Dial/Directory button and a two-digit
code using the numeric buttons.
G-2
Glossary