Printing Problems - Canon H12157 User Manual

Printing Problems

If you are having problems printing with the LASER CLASS 2060P, check
the problems and solutions listed in the following table.
Problem
The Alarm lamp comes
on and the LASER
CLASS 2060P beeps
while printing?
Nothing prints?
Chapter 13
Possible cause
The LASER CLASS 2060P
may have a paper jam.
The power cord may not be
plugged in securely.
The toner cartridge may need
to be replaced.
Solution
Clear any paper jams as
described earlier in this
chapter.
If the LASER CLASS 2060P
has no paper jam, unplug it,
wait five seconds, then plug
it in again. If the problem is
fixed, the Alarm lamp will
be off, and the LCD display
will show the date and
receiving mode (standby
mode). If the Alarm lamp
stays on, call your local
authorized Canon Facsimile
Dealer.
Make sure the power cord is
plugged securely into the
unit and into a wall outlet.
Replace the toner cartridge.
See page 2-34.
Frequently Asked Questions
13-23