Figure 3
Figure 4
6. Polarized Terminal Connections for the Battery (+ Red color; - Black color).
Installation
Location
Install the power module and battery module in a protected area with adequate airflow and free of excessive
dust. Do not operate the UPS outdoors.
DIN Rail Mounting
1. Tilt and place the unit onto the DIN rail.
2. Push the unit downward until it stops.
3. Push at the lower front edge to lock. Ensure that the retainer has locked.
Removing the Unit from the DIN Rail
Push the button and swing the bottom out and up.
Figure 5
Page: 4