Emerson SolaHD SDU AC B-Series User Manual

Emerson SolaHD SDU AC B-Series User Manual

Uninterruptible power supply

Advertisement

Quick Links

Uninterruptible Power Supply
User Manual
SDU AC B-Series

Advertisement

Table of Contents
loading

Summary of Contents for Emerson SolaHD SDU AC B-Series

  • Page 1 Uninterruptible Power Supply User Manual SDU AC B-Series...
  • Page 2: Table Of Contents

    SDU AC-B Series A272-353 Rev. 1 2/2021 CONTENTS What’s Included......Page 1 1.0 Introduction .
  • Page 3: What's Included

    SDU AC B-Series A272-353 Rev. 1 2/2021 What’s Included The SDU AC B-Series UPS is shipped with the following items: User manual • High speed 2.0 Standard Type A-B USB cable, 6 ft. (1.8 m) • One SDUCOMMCVR the SDU AC-B Series communication slot cover. •...
  • Page 4: Introduction

    SDU AC-B Series A272-353 Rev. 1 2/2021 Introduction Thank you for selecting the SDU AC B-Series Uninterruptible Power System. This manual contains important safety instructions that should be followed during the installation and operation of your UPS. • Please read all safety, installation and operating instructions before attempting to install or operate the UPS.
  • Page 5 SDU AC B-Series A272-353 Rev. 1 2/2021 The SDU AC - B Series is a compact, “Off-Line” DIN rail mountable UPS, which provides conditioned power to sensitive electronic equipment in an industrial environment. It supplies connected equipment with stepped approximation to sinewave input during power outage to simulate the power generated by the utility.
  • Page 6: Important Safety Instructions

    SDU AC-B Series A272-353 Rev. 1 2/2021 2.0 Important Safety Instructions 2.1 Safety Precautions—SAVE THESE INSTRUCTIONS This manual contains important safety instructions that should be followed during the installation of the Uninterruptible Power Supply (UPS). Please read all safety, installation, and operating instructions before attempting to install or operate the UPS.
  • Page 7: General Description

    SDU AC B-Series A272-353 Rev. 1 2/2021 3.0 General Description Figure 2: Front Panel 1. POWER ON/OFF/TEST: NOTE: The factory ships unit with Power Lock Feature enabled. This is to avoid accidental startup of the UPS during shipping via the push button. •...
  • Page 8 SDU AC-B Series A272-353 Rev. 1 2/2021 8. COMM PORT: Communication card slot. COMM CARDS: SDUCFRELAYCARD and Active communication cards can be purchased separately. The UPS can detect the presence of a COMM CARD and identify what kind of COMM CARD is inserted.
  • Page 9: System Block Diagram

    SDU AC B-Series A272-353 Rev. 1 2/2021 4.0 System Block Diagram UPS OUTPUT RELEY INPUT FILTER FUSE BRIDGE RECTFITER DC BOOSTED DC TO STEP RECTFITER AC TO DC TO HIGH DC SINE WAVE LEVEL Figure 4: SDU AC - B Series UPS System Block Diagram P a g e...
  • Page 10: Installation Instruction

    SDU AC-B Series A272-353 Rev. 1 2/2021 5.0 Installation Instructions To reduce risk of fire, connect only to a circuit provided with 20A maximum branch circuit overcurrent protection in accordance with the NEC and CEC. Figure 5: Input/Output Terminals • Placement: Install the UPS horizontally in a protected area with adequate airflow: 20mm above and below the unit, 10mm in front of the unit.
  • Page 11 SDU AC B-Series A272-353 Rev. 1 2/2021 Risk of electric shock, disconnect AC main power source before wiring. Ensure proper grounding. • I/O Wiring: Check that the UPS and the AC Supply is OFF (disconnected) before installation. Wire the UPS terminals with 90°C rated copper wire according to the table below. Connect the AC input ground terminal to the main supply ground.
  • Page 12: Operation Instruction

    SDU AC-B Series A272-353 Rev. 1 2/2021 6.0 Operating Instructions TURNING ON THE UPS Press the POWER ON/OFF/TEST button for more than 2 seconds and the LEDs will turn ON. • Note: If utility power is not present, the UPS will be in back-up mode. The load will be powered from the internal batteries until the discharge point is reached.
  • Page 13: Led Diagnostics

    SDU AC B-Series A272-353 Rev. 1 2/2021 GREEN MODE The Green mode is only for 230V models only. By default, Green Mode Enabled. If the load level is less than approximately 8% ~ 12%, the UPS will shut down to save battery in 3 minutes. If power is restored within 3 minutes the UPS will return to AC mode.
  • Page 14: Battery Replacement

    SDU AC-B Series A272-353 Rev. 1 2/2021 8.0 Battery Replacement The battery may be replaced by service personnel only. When the UPS is installed in a Class I, Division 2 Groups A B C D or Class I Zone 2 II C hazardous location, adhere to the following: Warning —...
  • Page 15 SDU AC B-Series A272-353 Rev. 1 2/2021 Step 3: Take out the battery Figure 8: Take out the Battery Notice: Battery replacement distance required: L ≧ 250mm Figure 9 : Battery replacement space 13 | P a g e...
  • Page 16: Troubleshooting

    SDU AC-B Series A272-353 Rev. 1 2/2021 9.0 Troubleshooting When the UPS is installed in a Class I, Division 2 Groups A B C D or Class I Zone 2 II C hazardous location, adhere to the following: Warning — Explosion Hazard — Do not disconnect the equipment while the circuit is live or unless the area is known to be free of ignitable concentrations.
  • Page 17: Technical Specifications

    SDU AC B-Series A272-353 Rev. 1 2/2021 10.0 Technical Specifications Catalog Number Description SDU 500B SDU 850B SDU 500B-5 SDU 850B-5 INPUT Capacity VA/Watts 500/300 850/510 500/300 850/510 Nominal Voltage 120 Vac 230 Vac Frequency 50 or 60 Hz Harmonic THD: 38.1%;...
  • Page 18 SDU AC-B Series A272-353 Rev. 1 2/2021 CERTIFICATIONS UL 1778, 5th Ed./CSA 107.3 overvoltage category II, pollution degree 2. Safety UPS evaluated for use in UL 508 industrial control applications overvoltage category III, pollution degree 3 with no output derating UL121201/CSA 213 Class I, Division 2 Groups A B C D T4 ATEX –...
  • Page 19: Software Interface

    SDU AC B-Series A272-353 Rev. 1 2/2021 11.0 Software and Interface Power Monitoring Software (UPSwatch SOFTWARE) Note: UPSWATCH - Monitoring/diagnostic Software is available by downloading at www.solahd.com The software is compatible with: Windows 7, 8, 10, Windows 2003, 2008, 2012, 2016, Windows 2008/2012 Server Core, Hyper-V 2008/2012, Oracle Linux 7.1, Linux OpenSUSE 11.4, Linux Ubuntu 10.04, Linux Fedora 3.1.9, CentOS 5.8, Citrix XenServer 6.0.0, and Linux KVM.
  • Page 20: Technical Support

    Note that unit specifications are subject to change without notice. Contact Information Website: www.solahd.com Technical Services E-Mail: solahd.technicalservices@emerson.com Warranty Please see the “Terms & Conditions of Sale”. While every precaution has been taken to ensure accuracy and completeness in this manual, Appleton Grp LLC d/b/a Appleton Group assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions.
  • Page 21 The Emerson logo is a trademark and service mark of Emerson Electric Co. Appleton Grp LLC d/b/a Appleton Group. SolaHD is a registered trademark of Appleton Grp LLC. All other marks are the property of their respective owners. © 2018 Emerson Electric Co. All rights reserved. United States...

Table of Contents