Connecting the Unit - Wiring Diagrams
SDU DC UPS B-Series with SDU 24-BATB
WARNING - Risk of electric shock!
Disconnect the DC input's AC supply connection before wiring. Operate the UPS only from a properly
grounded (earthed) DC supply. To reduce the risk of electric shock, do not remove the cover. For
service, contact a qualified technician.
Connections:
1. Use the polarized cable to connect the power module to the battery module.
2. Connect the power module dc input connector to the 24 Vdc input power source.
3. Hardwire the load to the power module output terminal connector.
Page: 8
Figure 10