Electric Power Supply - Cleveland SteamCraft 21CGA5 Operation Installation Maintenance Manual

Gas convection steamer
Hide thumbs Also See for SteamCraft 21CGA5:
Table of Contents

Advertisement

J. Electric Power Supply
The electric supply must match all electrical and wiring requirements specified on the rating plate.
NOTE: The 21CGA5 Electrical Diagram is located inside the service panel opposite the hinge side.
The connection must be made as follows:
1. Install a main disconnect switch and a separate fuse or breaker for this appliance as shown in
Figure 3-9. The fused disconnect switch is referred to as the "Main External Power Switch."
2. The 21CGA5 comes with a cord and plug installed for 115-volt controls.
3. Install the 21CGA5 on a dedicated circuit.
DRAIN LINE
COLD WATER SUPPLY LINES
Figure 3-9
Electrical Layout
MAIN EXTERNAL
POWER SWITCH
Ultra 5
21

Advertisement

Table of Contents
loading

Table of Contents