Blichmann Engineering CIP Spray Ball Assembly Operation Maintenance

Table of Contents

Download this manual

CIP Spray Ball

Assembly, Operation, & Maintenance

Congratulations on your purchase, and thank you for selecting the CIP Spray Ball from Blichmann Engineer-

ing™. We are confident that it will provide you years of service and many gallons of outstanding beer. This

manual will familiarize you with the use, assembly, and the sanitation procedures for the product.

PLEASE READ AND THOROUGHLY UNDERSTAND THIS MANUAL PRIOR TO USE FOR

About This Manual:

Warning:

Sections labeled "Warning" can lead to serious injury or death if not followed. Please

thoroughly read these sections and understand them completely before use. If you do

not understand them or have any questions, contact your retailer or Blichmann Engi-

neering (www.BlichmannEngineering.com) before use.

Sections labeled "Caution" can lead to equipment damage or unsatisfactory perfor-

Caution:

mance of the equipment. Please read these sections thoroughly. If you have any ques-

tions, contact your retailer or Blichmann Engineering (www.BlichmannEngineering.

com) before use.

Sections labeled "Important" should specifically be followed to ensure satisfactory re-

Important:

sults with the product.

CIP Spray Ball

For replacement parts visit blichmannengineering.com/genuine-replacemnet-parts

IMPORTANT SAFETY INFORMATION!

Table of Contents

Need help?

Do you have a question about the CIP Spray Ball and is the answer not in the manual?

Page 1 CIP Spray Ball Assembly, Operation, & Maintenance Congratulations on your purchase, and thank you for selecting the CIP Spray Ball from Blichmann Engineer- ing™. We are confident that it will provide you years of service and many gallons of outstanding beer. This manual will familiarize you with the use, assembly, and the sanitation procedures for the product.
Page 2 Caution: Do NOT use any cleaner or sanitizer containing chlorine such as bleach. Over time, this will pit and erode stainless steel. The Blichmann Engineering CIP spray ball is an assistive cleaning tool to aid in the cleaning and sanitizing of the Blichmann fermentors and is not intended to adhere to ASME BPE standards.
Page 3 After the fermentor has been empties of its contents attach a ½” barbed fitting to the bottom dump valve. Figure 5 1. Before using the CIP Spray Ball rinse out any loose material inside the fermentor 2. Once the rinse is complete connect the hoses to the pump and kettle as shown in Figure 5.
Page 4 A. Limited Warranty Blichmann Engineering warrants to the original purchaser that this product will be free from manufacturing defects in material and workmanship for a period of one (1) year from the date of purchase by the customer. Proof of purchase is required. Blichmann Engineering’s obligation to repair or replace defective materials or workmanship is the sole obligation of Blichmann Engineering under this limited warranty.