Command Stand
Assembly, Operation, & Maintenance
Congratulations on your purchase, and thank you for selecting the Command Stand™
from Blichmann Engineering™. We are confident that it will provide you years of service
and many gallons of outstanding beer. This manual will familiarize you with the use,
assembly, and the sanitation procedures for the product.
PLEASE READ AND THOROUGHLY UNDERSTAND THIS MANUAL PRIOR TO USE
WARNING:
Sections labeled "Warning" can lead to serious injury or death if not followed. Please thoroughly read these sections
and understand them completely before use. If you do not understand them or have any questions, contact your
retailer or Blichmann Engineering (www.BlichmannEngineering.com) before use.
CAUTION:
Sections labeled "Caution" can lead to equipment damage or unsatisfactory performance of the equipment. Please
read these sections thoroughly. If you have any questions, contact your retailer or Blichmann Engineering
(www.BlichmannEngineering.com) before use.
IMPORTANT:
Sections labeled "Important" should specifically be followed to ensure satisfactory results with the product.
10-24 x 3/8" Phillips Screw
Black #6 Screw
1/4-20 x 1/2" Screw
Tie Holder
1/4" Nut
Grommet
1/4" Washer
Command Stand™
© Blichmann Engineering, LLC 2019
For replacement parts, visit: blichmannengineering.com/genuine-replacement-parts
IMPORTANT INFORMATION
FOR IMPORTANT SAFETY INFORMATION!
What' s In the Box?
Velcro Cable Strap
1/4" Hole Plug
Controller Mount
8mm Hole Plug
Left Hand / Right Hand Legs
™
Body
Feet
Back Plate
1
Need help?
Do you have a question about the Command Stand and is the answer not in the manual?
Questions and answers