Advertisement
Quick Links
BoilerMaker
Assembly, Operation, & Maintenance
Congratulations on your purchase, and thank you for selecting the BoilerMaker™ G2
brew kettle from Blichmann Engineering™. We are confident that it, and our suite of
accessories, will provide you years of service and many gallons of outstanding beer.
PLEASE READ AND THOROUGHLY UNDERSTAND THIS MANUAL PRIOR TO USE
WARNING:
Sections labeled "Warning" can lead to serious injury or death if not followed. Please thoroughly read these sections
and understand them completely before use. If you do not understand them or have any questions, contact your
retailer or Blichmann Engineering (www.BlichmannEngineering.com) before use.
CAUTION:
Sections labeled "Caution" can lead to equipment damage or unsatisfactory performance of the equipment. Please
read these sections thoroughly. If you have any questions, contact your retailer or Blichmann Engineering
(www.BlichmannEngineering.com) before use.
IMPORTANT:
Sections labeled "Important" should specifically be followed to ensure satisfactory results with the product.
BoilerMaker™ V7
© Blichmann Engineering, LLC 2020
For replacement parts, visit: blichmannengineering.com/genuine-replacement-parts
™ G2
IMPORTANT INFORMATION
FOR IMPORTANT SAFETY INFORMATION!
What' s In the Box?
Lid
Kettle
Thermometer
Valve
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Blichmann Engineering BoilerMaker G2
Summary of Contents for Blichmann Engineering BoilerMaker G2
- Page 1 Blichmann Engineering (www.BlichmannEngineering.com) before use. CAUTION: Sections labeled “Caution” can lead to equipment damage or unsatisfactory performance of the equipment. Please read these sections thoroughly. If you have any questions, contact your retailer or Blichmann Engineering (www.BlichmannEngineering.com) before use. IMPORTANT: Sections labeled “Important”...
-
Page 2: Assembly And Installation
Fig. 3 Screws Pivoting Mechanism Fig. 4 Use of the BrewMometer™ Note: The BrewMometer Manual™ is included in the BrewMometer™ Package. Please consult that manual for use and installation. BoilerMaker™ V7 © Blichmann Engineering, LLC 2020 For replacement parts, visit: blichmannengineering.com/genuine-replacement-parts... - Page 3 Do not use Teflon tape on this joint. When hand tight, use a wrench on the flats of the valve and a socket and torque wrench on the bulkhead fitting to tighten to 40 ft-lb (54 N-m) (shown in Fig. 6). Fig. 6 Fig. 5a Fig. 5b BoilerMaker™ V7 © Blichmann Engineering, LLC 2020 For replacement parts, visit: blichmannengineering.com/genuine-replacement-parts Figure 2b...
- Page 4 Min Recirculation rate (gpm) for RIMS or HERMS 0.50 0.75 1.00 1.25 1.50 2.25 2.25 Kettle dead space (gal.) 0.13 0.19 0.22 0.28 0.50 0.50 Volume to thermometer stem (gal.) 3.52 8.25 10.25 BoilerMaker™ V7 © Blichmann Engineering, LLC 2020 For replacement parts, visit: blichmannengineering.com/genuine-replacement-parts...
- Page 5 (3.6 N-m) prior to using the kettle. Do not over-tighten or joint could be damaged. If for any reason you have damaged, or suspect you have damaged, a nut/stud do not use the product. Contact your retailer or Blichmann Engineering™ to arrange for repair of the kettle.
- Page 6 If you have stuck the mash, close the valve and gently scrape the compacted grains from the bottom of the mash. Allow ten minutes for the air to dissipate from the mash then vorlauf (recirculate) until the wort clears. Then you may begin lautering again at a reduced rate. BoilerMaker™ V7 © Blichmann Engineering, LLC 2020 For replacement parts, visit: blichmannengineering.com/genuine-replacement-parts...
-
Page 7: Maintenance
In addition, DO NOT soak your kettle in cleaners or sanitizers for extended periods (1hr max) to avoid any problems with pitting O-Ring or galvanic corrosion. Dry thoroughly after cleaning. BoilerMaker™ V7 © Blichmann Engineering, LLC 2020 For replacement parts, visit: blichmannengineering.com/genuine-replacement-parts... - Page 8 False Bottom aFalseBottom The button louvered false bottom creates the perfect mash filter. BoilCoil™ aBoilCoil The BoilCoil™ immersion heater produces immediate, high efficient heat. BoilerMaker™ V7 © Blichmann Engineering, LLC 2020 For replacement parts, visit: blichmannengineering.com/genuine-replacement-parts...
- Page 9 A. Limited Warranty 1. Blichmann Engineering warrants to the original purchaser that this product will be free from manufacturing defects in material and workmanship for a period of one (1) year from the date of purchase by the customer. Proof of purchase is required.
Need help?
Do you have a question about the BoilerMaker G2 and is the answer not in the manual?
Questions and answers