Table of Contents
Advertisement
Available languages
Available languages
•
Insert the meat grinder head (3) into the open-
ing (4) matching the ledges on the head (3)
with the openings in the installation place
(4), turn the meat grinder head counterclock-
wise until bumping and release the button (5)
(pic. 1, 2).
•
Install the screw (9) into the meat grinder
head (3) body until bumping, slightly turning
it in different directions (pic. 3).
•
Install the crossed blade (10) (pic. 4).
•
Select one required plate (11 or 12) and set it
over the blade (10), matching the ledges on
the grate with the grooves on the meat grinder
head body (3) (pic. 5)
•
Install the nut (13) and fasten it clockwise with
a slight effort (pic. 6).
Attention!
Face the blade cutting side to the grate. If
–
the blade is installed improperly, it will not
grind the products.
The coarse cutting plate (11) is for pro-
–
cessing raw meat, vegetables, dried fruit,
cheese, fish, etc.
Small grate (12) is suited for processing
–
both raw and cooked meat, fish etc.
•
Install the food tray (2) on the meat grinder
head (3) feeding chute.
•
Place a suitable bowl under the meat grinder
head (3).
•
Insert the power plug into the mains socket.
•
Switch the meat grinder on by setting the
switch (8) to the position «ON» (on).
•
Slowly feed the meat pieces into the mouth
of the grinder head (3) using the pusher (1).
Notes:
For better meat processing slice it in cubes or
–
stripes. Defrost frozen meat completely.
During the operation, use only the pusher
–
supplied with the unit; do not use any other
objects for pushing meat, do not push meat
with your hands.
•
After you finish operating, switch the meat
grinder off, setting the switch (8) to the posi-
tion «0» and unplug the unit; after that you can
disassemble the unit.
•
To remove the meat grinder head, press the
lock button (5), turn the meat grinder head (3)
clockwise and remove it.
•
To disassemble the meat grinder head,
unscrew the nut (13) and take out the installed
IM VT-3625.indd 5
plate (11 or 12), the blade (10) and the screw
(9) from the meat grinder head body.
CLEANING AND CARE
•
After you finish operating, switch the meat
grinder off, setting the switch (8) to the posi-
tion «0», unplug the meat grinder and only
after that you can disassemble it.
•
Press the lock button (5), turn the meat
grinder head (3) clockwise and remove it.
•
Unscrew the nut (13) and remove the plates
(11 or 12) and the blade (10) from the screw
(9), remove the screw (9) from the meat
grinder head (3), clean the screw (9) from the
remaining products.
•
Wash all the removed parts of the meat
grinder with warm water and a neutral deter-
gent, then rinse and dry thoroughly. Do not
wash the meat grinder parts and attachments
in a dishwashing machine.
•
Clean the motor unit (7) body with a slightly
damp cloth and then wipe dry.
•
Do not use solvents or abrasives to clean the
motor unit (7).
•
Provide that no liquid gets inside the meat
grinder body.
STORAGE
•
Perform the requirements of the "CLEANING
AND CARE" section before taking the unit
away for storage.
•
It is recommended to oil the blade (10) and
the plates (11, 12) with vegetable oil to protect
them from oxidation.
•
Keep the unit in a dry clean place out of reach
of children and disabled persons.
DELIVERY SET
Meat grinder motor unit – 1 pc.
Meat grinder head, assembled (with installed
screw, blade, plate and nut) – 1 pc.
Pusher – 1 pc.
Food tray – 1 pc.
Grid – 1 pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Nominal voltage: 220-240 V ~ 50 Hz
Rated input power: 400 W
Maximal power: 1800 W
5
ENGLISH
05.02.2018 17:51:07
Advertisement
Table of Contents
