Safety Measures - Vitek VT-3625 Manual Instruction

MEAT GRINDER VT-3625
The meat grinder is intended for making minced
meat, poultry or fish.
DESCRIPTION
Pusher
1.
Food tray
2.
Meat grinder head body
3.
Meat grinder head installation place
4.
Meat grinder head lock button
5.
Carrying handle
6.
Motor unit body
7.
Operation mode switch (ON/0/R)
8.
Screw
9.
Crossed blade
10.
Coarse cutting plate
11.
Fine cutting plate
12.
Meat grinder head nut
13.
ATTENTION!
For additional protection against possible elec-
tric shock it is reasonable to install a residual cur-
rent device (RCD) with nominal operation current
not exceeding 30 mA. To install RCD, contact
a specialist.

SAFETY MEASURES

Read this instruction manual carefully before
using the unit and keep it for the whole unit oper-
ation period. Mishandling of the unit may lead to
its breakage and cause harm to the user or dam-
age to his/her property.
To reduce the risk of fire or electric shock and to
avoid other injuries it is necessary to observe the
following safety measures when using the elec-
tric meat grinder.
• Before using the unit for the first time, make
sure that the voltage in your mains corre-
sponds to unit operating voltage.
• Use only the accessories supplied with the unit.
•
To avoid electric shock, NEVER IMMERSE the
unit, the power cord and the power plug into
water or any other liquids.
•
Use a slightly damp cloth to clean the meat
grinder body and then wipe the unit body dry.
•
Never leave the operating meat grinder unat-
tended.
• After using the meat grinder switch it off and
unplug it.
• Always switch the meat grinder off and unplug
it before assembling, disassembling and
cleaning.
IM VT-3625.indd 3
• Place the unit on a flat steady surface away
from heat sources, open flame, moisture and
direct sunlight.
•
Do not set the unit on a heated surface or next
to it (for instance, near a gas or electric stove,
near a heated oven or a cooking surface).
•
Do not use the unit outdoors.
•
Before using the unit, make sure that all parts
are set properly.
•
Never push products into the feeding chute
with your fingers or other objects during oper-
ation. For this purpose use the pusher only.
•
Before using the meat grinder for the first
time, wash all removable parts that will con-
tact processed foods thoroughly.
• The meat grinder is not intended for chopping
nuts, food with hard fiber (for example, ginger
or horseradish), processing meat with bones
and meat with excess fat.
•
Wait until the moving parts of the meat grinder
stop and only then you can disassemble the
unit.
•
Continuous operation time of the unit should
not exceed 5 minutes, and then you should let
the unit cool down for 10-15 minutes.
•
Handle the power cord with care, prevent
it from multiple twisting and straighten the
power cord periodically.
• Do not use the power cord for carrying the
meat grinder.
•
Do not let the power cord hang from the edge
of a table, and make sure the cord does not
touch sharp furniture edges and hot surfaces.
•
When unplugging the unit from the mains,
hold the power plug but not the cord.
•
Do not connect or disconnect the power cord
from the mains and do not touch it with wet
hands, this may cause electric shock.
•
Do not allow children to touch the unit body
and the power cord during the unit opera-
tion.
• Do not allow children to use the unit as a toy.
•
During the unit's operation and breaks
between operation cycles, place the unit out
of reach of children.
•
The unit is not intended for usage by physi-
cally or mentally disabled persons (including
children) or by persons lacking experience or
knowledge if they are not under supervision of
a person who is responsible for their safety or
if they are not instructed by this person on the
usage of the unit.
3
ENGLISH
05.02.2018 17:51:07