Leds On Charger; Removing And Fitting The Battery; Inserting The Battery; Removing The Battery - Stihl AL 301-4 Instruction Manual

7 Removing and Fitting the Battery

► Press the button (1).
The LEDs (2) at the charger and the LEDs (3) at the
batteries are activated and indicate the status of the
charger and the charging status of the batteries.
6.4

LEDs on charger

The LED indicates the operating status of the charger or any
malfunctions. The LEDs can emit green light or flash red.
If the LED for the respective battery compartment emits
green light, the battery is being charged or waits to be
charged.
► If the LEDs flash red: Remedy the malfunction.
Malfunction in charger or battery.
7 Removing and Fitting the Battery
7.1

Inserting the battery

► Place the charger on a level surface or mount as
described in this User Manual.
► Insert the battery (1) up to the limit stop into the battery
compartment (2).
The battery (1) engages with a click and is now locked.
0458-829-9921-A
1
2
7.2

Removing the Battery

1
► Press both locking levers (1).
The battery (2) is released and can be removed.

8 Transporting

8.1

Transporting the Charger

► Disconnect the mains plug from the power supply.
► Remove all batteries.
► Wind up the connecting cable and attach it to the charger.
► For transporting a not permanently installed charger in a
vehicle:
► Secure the charger with lashing straps, belts or a net to
prevent it turning over and moving.
► Do not stack several chargers.

9 Storing

9.1

Storing the Charger

► Disconnect the mains plug from the power supply.
► Remove the battery.
English
1
2
25