Charging The Battery; Displaying State Of Charge - Stihl AL 301-4 Instruction Manual

English
6.2

Charging the battery

The charger can charge up to four batteries successively.
Depending on the battery inserted first, the batteries are
charged in the sequence shown. If one battery cannot be
charged, the charging process will continue with the next
battery.
The charging time depends on various factors, e.g. the
battery temperature or the ambient temperature. The actual
charging time may vary from the charging time indicated.
The charging time is indicated at www.stihl.com/charging-
times.
The charging process starts automatically when the mains
plug is plugged into a socket and the battery is inserted into
the charger. The charger switches off automatically when
the battery is fully charged.
The battery and the charger warm up during charging.
The charger has a built-in fan which may cut in and out
during the charging process.
24
1
2
3
► Insert the mains plug (6) in a convenient wall outlet (7).
The charger (3) runs a self test. All LEDs (4) emit green
light for about 1 second and then red for about 1 second.
► Fit the connecting cable (5).
► Insert the battery (2).
The LED (4) for the respective battery compartment emits
green light. The LEDs (1) on the battery emit green light
and the battery (2) is being charged.
► When the LED (4) for the respective battery compartment
and the LEDs (1) on the battery stop emitting light: The
battery (2) is fully charged and can be taken out of the
charger (3).
► If the charger (3) is no longer required. Disconnect the
mains plug (6) from the wall outlet (7).
6.3

Displaying State of Charge

1
2
3
6 Charging the Battery, LEDs
4
7
6
5
0458-829-9921-A