PB TEEN Oxford Assembly Instruction

Oxford Desk Storage
Assembly Instruction

Pre-Assembly:

Please read all instructions before beginning assembly.
•
For your safety and convenience, assembly by two adult is recommended.
•
Carefully set out and identify all part hardware prior to assembly.
•
Save all packing materials until assembly is complete to avoid accidentally discarding small
•
part or hardware.
The Oxford Left/Right Storage is designed for use with the Oxford Desk top.
•

Part Enclosed in Box 1:

• (1) Left Storage with drawers (A)
• (1) Right Storage with door
• (2) Side Panels
• (1) Fixed Shelf
• (1) Bottom Panel (D)
• (1) Door Panel
F
• (1) Back Panel
• (1) Back Rail
• (1) Shelf (H)

Hardware Enclosed:

• (4) Allen Bolts M6 x 40mm (I)
• (12)Wooden Dowels M8 x 30 (J)
• (1) Allen Key M4 (K)
• (17)Screws 6 x 3/4" (L)
• (4) Bolts M4 x 1/4" (M)
• (4) Shelf Pins (N)
• (4) Allen Bolts M6 x 55mm (O)
• (4) Screws 6 x 5/8" (P)

To Assemble:

1.
Carefully lay the side panel (B) on a flat scratch-free or carpeted surface. Insert the
wooden dowels (J) into the holes on one side panel (B), as shown in fig 1.
2.
Attach the back rail (G) by inserting the wooden dowels on the side panel (B) into the holes
on the back rail (G) as shown in fig 2.
Fig.1 J
3.
Attach the fixed shelf (C) by inserting the wooden dowels on the side panel (B) to the holes
on the fixed shelf (C). Insert the Allen Bolts (I) through the holes on the cleat of the
fixed shelf (C) to the holes on the side panel (B) and tighten with the Allen Key (K), as
shown in figure 3, illustration 1.
Fig.3
C
(B)
(C)
(E)
(F)
(G)
(I)
(J)
B
B
A
(K) (M)
(L)
Fig.2
G
B
Ilustration.1
(N) (O) (P)