S Ratchet Re Plate, Cassette Guide S - Sony DCR-TRV725E Service Manual

4-7. S Ratchet RE Plate, Cassette Guide S

1. Removal procedure
1) Remove the blind plate. (Refer to 4-5.)
2) Remove the RE return plate spring 1.
3) Remove the S ratchet spring 2.
4) Remove the S ratchet arm 3 in the direction of the arrow A.
Note: Do not reuse the S ratchet arm.
5) Remove the S ratchet RE plate.
6) Remove the screw (camera tapping M1.4 × 2)5.
7) Remove the cassette guide S 6 in the direction of the arrow
B.
Remove the S ratchet arm in the
direction of the arrow A .
Do not reuse
the S ratchet arm.
A
Fixed here.
S ratchet spring
Remove the S ratchet (RE) plate in the
direction of the arrow B .
dowel
B
3 S ratchet arm
4 S ratchet
(RE) plate
Fig. 4-7.
— 20 —
2. Attachment procedure
1) Attach the cassette guide S 6 to the notch of the LS chassis
block assembly with the screw (camera tapping M1.4 × 2).
2) Attach the S ratchet RE plate 4 to the shaft of the LS chassis
block assembly.
3) Attach the S ratchet arm 3 to the shaft of the LS chassis block
assembly. At this time, the dowel of the S ratchet RE plate 4
must be inserted into the U-shaped notch of the S ratchet arm
3.
4) Hook the S ratchet spring 2 on the notch of the S ratchet arm
and attach it to the notch of the LS chassis block assembly.
5) Attach the RE return plate spring 1 to the notch of the LS
chassis block assembly.
6) Attach the blind plate. (Refer to 4-5.)
2 S ratchet
spring
B
6 Remove the cassette
guide (S) in the direction
of the arrow B .
1 RE return plate spring
5 Screw
(camera tapping M1.4 × 2)