Blind Plate, Lock Guide - Sony DCR-TRV725E Service Manual

4-5. Blind Plate, Lock Guide

1. Removal procedure
1) Remove the diode D001 (tape LED) 1 from the notch of the
plate 4.
2) Remove the flexible wiring board 2 (FP-301) from T-shaped
portion of the blind plate 4 in the direction of the arrow A.
3) Remove the screw (camera pan2 main M1.4 × 1.6) 3.
4) Release the hook on the notches G, D, E and F of the blind
plate 4 in the direction of the arrow B.
5) Remove the reel release lever 5 in the direction of the arrow
C.
4 Remove the blind plate in the
direction of the arrow B .
A
2 Remove the FP-301 flexible
board in the direction of
the arrow A .
3 Screw
(camera pan 2 main M1.4 × 1.6)
Notch G
— 18 —
2. Attachment procedure
1) Attach the reel release lever 5 to the blind plate 4.
2) Hang the notches G, D, E and F of the blind plate 4 on
the hook.
3) Attach the screw (camera pan2 main M1.4 × 1.6) 3.
Tightening torque: 0.078 ± 0.01 N•m (0.8 ± 0.1 kgf•cm)
4) Attach the flexible wiring board (FP-301) 2 to the T-shaped
portion of the blind plate 4.
5) Attach the diode (tape LED) 1 to the notch of the blind plate
4.
Claw
B
Fig. 4-5.
C 5 Remove the reel release
lever in the direction of
the arrow C .
Notch D
Notch E
Notch F
1 D001
Diode (tape LED)