SECTION 3
Still another way of interfacing the MIDIVERB III to a mixer or recording
console would be in-line across the output of your mixing console (See
Figure 4).
This setup would be used only if you needed to effect the entire mix.
FIGURE 4
STEREO CONNECTION TO THE CONSOLE MAIN OUTPUTS
MAIN OUT
LEFT
LEFT INPUT
After you have connected your MIDIVERB III to either an instrument or
mixing console:
1) Turn the
Indicator lights (It's OK if the red Clip LED occasionally lights,
but distortion will result if it remains on constantly).
MAIN OUT
RIGHT
RIGHT INPUT
control up until the green
INPUT LEVEL
CONNECTION TO THE MAIN OUTPUTS
LEFT OUTPUT
TO MIXDOWN DECK
OR SOUND SYSTEM
SIGNAL
20
RIGHT OUTPUT
SETUP
LED