Midi Mapping; Midi Prog/9; Int. Prog/0 - Alesis MIXING CONSOLES Reference Manual

DESCRIPTION OF CONTROLS
When in the EDIT mode, the button is used to select the send and
MIDI
receive channel for the MIDIVERB III. The range is channel 01 through
16.
Pressing the button a second time selects if the MIDIVERB III will
MIDI
accept MIDI Program Change commands.
Pressing the button a third time selects the ECHO On or Off
MIDI
function. This will echo any MIDI information that the MIDIVERB III
receives at its MIDI input (except for system exclusive messages that are
specifically for the MIDIVERB III) back out its MIDI output.
The button can also be used to transmit MIDIVERB III programs 100
MIDI
through 199 via MIDI system exclusive. Simply hold the button and
MIDI
press .
STORE
The MIDI functions are global functions and are not stored with an
individual program.
When in the PROGRAM mode, this is button 8 of the keypad for
selecting a program by directly entering the desired program number.

MIDI MAPPING

The next two buttons control what is known as MIDI program MAPPING,
which means that a MIDI program change number can be mapped to
select any of the MIDIVERB III's programs. For example, without MIDI
program MAPPING, selecting MIDI program 23 from an external MIDI
device would select program 23 on the MIDIVERB III. With MIDI
MAPPING, selecting MIDI program 23 on an external MIDI device could
be set to select any program on the MIDIVERB III.
The MIDI MAPPING functions are global functions and are not stored
with an individual program.

MIDI PROG/9

Part of the MIDI program MAPPING section when in the EDIT mode, the
ram button selects a MIDI program number from 000 through
MIDI PROG
127 that will be received by the MIDIVERB III from an external MIDI
controller.
When in the PROGRAM mode, this is button 9 of the keypad for
selecting a program by directly entering the desired program number.

INT. PROG/0

13