Editing A Program; Reverb - Alesis MIXING CONSOLES Reference Manual

SECTION 4
3) Press the "Up"
4) Set program 023 on the MIDIVERB III to correspond with the
desired program number on your synth, sequencer, or other
MIDI device.
xxxxxxx).
5) Send the program change from your synth, sequencer, or
other MIDI device.
Any MIDIVERB III program can be easily edited (modified) by entering
the EDIT mode. As an example, we will edit our program 023.
1) Select the
adjacent to the
turn off, and the LED for the function or parameter last
selected will light.
This indicates that the bottom row of functions of the top row of
buttons can be accessed, so now the
CHORUS
DELAY REGENERATION, CHORUS SPEED, EFFECT EQ,
and DELAY MIX. (The illustration indicates a Reverb Decay
time of 50).
2) Pressing the
indicates that the top row of edit functions on the top row of
buttons can be accessed.
Now the

REVERB

ALGORITHM, INPUT EQ, and REVERB MIX. (The illustration
indicates that a Reverb Algorithm of "ro1" or Room 1 has been
chosen).
Pon
button until display read "Pon"
VALUE
(see " How to Use MIDI Mapping" on page
button. The lower of the the two LEDs
EDIT
button will light, the PROGRAM LED will
EDIT
, , and buttons will control REVERB DECAY,
EQ MIX
50
button again will select the upper LED which
EDIT
, ,
REVERB DELAY CHORUS
ALGORITHM,

EDITING A PROGRAM

REVERB
, , and buttons control
EQ MIX
DELAY TIME,
24
, ,
DELAY
CHORUS