Chorus Speed - Alesis MIXING CONSOLES Reference Manual

variables are available, from varying the Speed and Depth of the LFO to
feeding back part of the signal to make the effect stronger.
In the case of a Stereo Flange, the signal is split into three parts with a
dry signal and a separate Delay section for both left and right channels
with one channel flanging up while the other channel flanges down. This
causes the effect to become more pronounced and dramatic.
Varying the Chorus Speed parameter affects the amount of signal
detuning, and therefore the depth of chorusing while in the Chorus
mode. When in the Flanging mode, Chorus Speed will affect the speed
of the flange.
The EQ section of the MIDIVERB III is actually a single pole, 6dB per
octave low pass filter, designed to roll off the high frequency response of
either the input or effect in order to simulate the high frequency rolloff
that occurs naturally in different environments.
displayed is the frequency point where the signal has already rolled off -
3dB. See Figure 7.
When in the EDIT mode, pressing the
INPUT EQ or EFFECT EQ, depending which EDIT LED is lit.
FIGURE 7
The programmable parameters are:
EQ
FREQUENCY SELECTIONS
Off 4.88KHz
13.8KHz 4.48KHz
11.8KHz 4.11KHz
10.3KHz 3.77KHz
9.23KHz 4.11KHz
8.33KHz 3.45KHz
7.56KHz 3.15KHz
6.89KHz 2.86KHz
6.31KHz 2.59KHz
5.79KHz 2.34KHz
5.31KHz 2.09KHz
The number that is
button will access either the
1.86KHz
1.64KHz
1.43KHz
1.23KHz
1.03KHz
0.85KHz
0.66KHz
0.49KHz
0.33KHz
0.16KHz
29
USING MIDIVERB III

CHORUS SPEED

EQ