Download Print this page
Alesis ADAT-M20 Command List
Alesis ADAT-M20 Command List

Alesis ADAT-M20 Command List

Alesis adat-m20 audio-recording: user guide
Hide thumbs Also See for ADAT-M20:

Advertisement

Quick Links

ALESIS
M20

System Exclusive

Fourth Revision
August 5, 1999

Advertisement

loading

Summary of Contents for Alesis ADAT-M20

  • Page 1: System Exclusive

    ALESIS System Exclusive Fourth Revision August 5, 1999...
  • Page 2 The PDAT responds to all Alesis system exclusive ADAT commands, as well as MIDI Machine Control (MMC) commands. In addition, the PDAT also responds to and sends out Alesis system exclusive PDAT commands to access functions that may or may not be addressed by PDAT or MMC commands.
  • Page 3 OPCODES Note: 1) Items in parentheses,{}, can be repeated multiple times 2) Items in square brackets, [], are optional, depending upon preceding info 01H - Write Parameter F0H 00H 00H 0EH 16H <dev#> 01H {<param#> [<sub-param>] <data>} F7H <param> - If = 0, then function bit to follow in sub-param position - If <>...
  • Page 4 05H - Search Switch Toggle F0H 00H 00H 0EH 16H <dev#> 05H <data> F7H <data> - search switch status (0=disable, 7Fh=enable) 06H - Master Search Mode F0H 00H 00H 0EH 16H <dev#> 06H <data> F7H <data> - master search mode status (0=master not in search mode, 7Fh=master in search mode) Information Query/Response Commands 07H - PDAT Software Version Inquiry...
  • Page 5 Data Transfer Commands 10H - MIDI Sysex Dump F0H 00H 00H 0EH 16H <dev#> 10H 06H <type> F7H <type> - 0 = all • Request dump of all user parameters Response: F0 00 00 0E 16 <dev#> 10H 07H <type> <byte count> <data>F7 <type>...
  • Page 6 <#data bytes> <24 Bit Address> <data byte 1> .. <data byte N> <checksum> where: <#data bytes> is sent as a single byte greater than 0 but less than 128. <24 Bit Address> is sent as 6 nibble-ized data bytes. For example, address 123456H is sent as <data byte>...
  • Page 7 Parameter Table Parameter Name <param> VU Peak Hold Mode VU Peak Hold Time VU Decay Time VU Meter Scale VU Fine Headroom Digital Source Input Select Bitmap Analog Routing ADAT Optical Source Track Copy Source AES/EBU Source AUX Track Source Pre-Roll Time Post-Roll Time Loop Start Point...
  • Page 8 Parameter Name <param> SMPTE Offset Value Chase Mode Flywheel Amount Park Ahead Internal Gen Mode Int Gen Start Reference Int Gen ABS Offset Int Gen User Set Start Int Gen User Bits Varispeed MIDI Device ID MMC Output MTC Output Dig Output Format One-button Record Direct Input Monitor...
  • Page 9 Parameter Name <param> Locate Before Play Mute Until Locked Dynamic Punch Track Group Enable Unthread Timeout Crossfade Time Remote Source Online Control Mode Tape Counter Mode Reference Counter Mode Clock Source Sample Rate SMPTE Rate PDAT System Exclusive …………………………………………………………………………………………………………Page 9 <data>...
  • Page 10 Parameter Name <param> Timecode Source Chase Reference Pitch Mode RMD Error Enable Digital Scan Enable Digital Scan Level Pseudo Master RS-422 Trk Arm Enable RS-422 Track Mapping PDAT System Exclusive …………………………………………………………………………………………………………Page 10 <data> 0..1 0 = Internal 1 = External 0..1 0 = ABS Time 1 = Tape TC Track...
  • Page 11 MIDI Data Format Types Bit Parameter - Normal data format: 0 or 1 - MIDI data format: 0 (disabled) or 7Fh (enabled) Byte Parameter with max value less than 80h - Normal data format: - MIDI data format: <0 a Byte Parameter with max value greater than or equal to 80h - Normal data format: - MIDI Data Format:...

This manual is also suitable for:

M20 system exclusive